Hardware:
Belay Equipment for RESCUE and for CLIMBING/MOUNTAINEERING

products/UH-PZDS007-1.jpg UH-PZDS007: Petzl GRIGRI Belay Device/Descender, Self-Braking Device for 10-11mm Single Rope [D14]
$94.95 $91.95 On Sale!
For belaying of a leader or second, and for short abseils on single rope.

Self-braking system: if a fall occurs, the pivoting cam inside the device facilitates braking.

Simple to use:
  • control of the running of the rope using both hands to slide the rope through the device, braking by hand, fall arrest by holding the free end of the rope, release of the rope using the handle.
  • For ropes from 10-11 mm (9.7 mm accepted)
  • Weight: 225g
  • CE

    • products\UH-PZDS008.jpg UH-PZDS008: Petzl REVERSO 3 NEW Belay/Rappel Device, Descender for 8-9mm Double Dynamic Rope or 10-11mm Single Dynamic Rope [D17]
    $34.95
    Belay device for the leader or the second, descender. For use with ropes from 8 mm to 11 mm used single or double.

    Multipurpose device: belaying the leader, one or more seconds, or as a descender.

    Attachment point for direct attachment to belay (auto-braking belaying of one or more seconds).

    Separation of ropes for easier clipping of alternate running belays and avoiding crossing of the ropes when abseiling.
  • Does not twist the ropes
  • For 8-9 mm double dynamic rope
  • For 10-11mm single dynamic rope
  • Weight: 81 g.

    COLORS: Blue, Green or Titanium (gray)

    • products/UH-PZDS009.gif UH-PZDS009: Petzl I'D Descender Self-Braking Descender, NFPA NEW MARCH 2009 [D200L0 / D200S0 Series]
    $235.00 $215.00 On Sale!
    NEW VERSION JUST RELEASED MARCH 2009 - NOW AVAILABLE
  • The new button at the end of the handle facilitates movement on horizontal and low-angle surfaces
  • The new angle of anti-error saftey catch makes it easier to take up slack
  • The different handle positions are clearly indentified for better understanding
  • Multi-fuction handle allows you to regulate the descent and get into position without having to tie off the device. The handle also has an anti-panic function.
  • Small: Rope Diameter: 10mm/11.5mm
  • Large: Rope diameter 11.5mm/13mm (Wt: 1.4 lbs)
  • Certification CE EN 341 Class A NFPA 1983 G
  • Weight: 530 g, Made in France, 3 Yr Guarantee
  • Aluminum side plates, stainless steel pulley, chrome-plated steel cam, nylon handle and button

    CHOICES: SMALL (Gold) OR LARGE (Red), NOW Available Black! - Add'l $6 fee for Black

    • products/UH-CMBL001.jpg UH-CMBL001: CMI Micro Belay Plate, 9mm or 11mm [MBP101 / MBP102]
    $12.70
    CMI Micro Belay Plates set the standard for efficient rope handling. CMI Micro Belay Plates are hot forged from 7075 aircraft alloy aluminum, a material with nearly double the strength of that used in lesser belay plates. By mating this particular alloy with the forging process, we have been able to build a remarkably lightweight product while still maintaining a substantial safety margin. Nylon rope running over bare aluminum acts as a low grade file, slowly abrading it's way into the aluminum surface and weakening the part. That's why after forging, heat treating, deburring, and polishing, our Micro Belay plates receive our exclusive hard-coat to keep the strength for years to come.
  • Length: 4.8cm or 4cm (1 5/8")
  • Width: 2.5cm or 4cm
  • Weight: 8g or 11g (3/8oz)
  • Breaking Strength: 6000+ lbs.

    Important Note: CMI Micro Belay Plates are the lightest and strongest available anywhere. In order to acheive this, cross-sections have been reduced to the bare minimum, leaving little room for further reduction by rope wear. Our exclusive hard-coat will protect the aluminum from rope wear degradation for a long time. However, when the hard-coat is worn through, replace it!

    CHOICES: 9mm or 11mm

    • products/UH-OPCE006.gif UH-OPCE006: Omega Pacific, Climbing Belay/Rappel Device SBGII [SBGII]
    $19.95
    By incorporating a rigid stem on this device, climbers go from full lock-off to whipping out rope in a single, smooth action—no more binding up as the device tries to free itself. The amount of friction can be completely adjusted to suit your particular need. Does your climber outweigh you? Are you using skinny ropes? Then set up the brake line through the V-Slots! Clipping in short (into the oblong hole in the center of the stem) adds even more braking power.

    Climbing with fat ropes, a skinny partner or on low-angle slabs? Then belay off the U-Grooves and clip into the bottom hole of the SBGII for less friction. If you’ve ever rapped on a single 8mm or 9mm rope with other belay devices, you know what a fast and loose ride that can be! With the SBGII, wrap that skinny cord around the rigid stem and rappel, figure-8 style, for the ultimate in control and safety.
  • Color: Bright, Aluminum
  • Weight 77g / 2.72 oz.

    • products/UH-GIAS009.jpg UH-GIAS009: Gibbs KLIMAIR Mechanical Prusik,
    Arborist Ascender     (Climb Air)
    $79.99 $76.99 On Sale!
    Bi-directionional mechanical prusik.
  • 1/2" Lanyards & Flip Lines
  • .160 Alum Shell
  • Stainless Steel
  • Swivel Eye

    For use in 2 in 1 lanyards. It can also be used for ascending and rigging aplications. Not for self belay by solo climbers.

    • products\UH-BMDS002.jpg UH-BMDS002: BMS Belay Spool
    $107.50
    Breaking Strength: 15,000 lbs. Rated Working Load: 600 lbs. Friction Ratio @ Static Load 40:1 Max. Force @ Working Load 15 lbs. Informal Drop Testing, 600 lbs. load Easily caught and controlled load using one gloved hand at drops of one, three and six feet with rope slippage of approximately eight, twelve and eighteen inches respectively with no observable rope damage.

     
    MID YEAR CLEARANCE
    Contact Urban HART Email Urban HART
    HOME SHIPPING & ORDERING INFORMATION GIFT CERTIFICATES