Ventiliation: Positive Pressure Gas Powered Motor Ventilators

The positive pressure ventilators from Super Vac has a minimum five (5) year warranty. The engine shall be warranted by the engine manufacturer for a minimum of two (2) years.

Air Systems has a 1 year manufacturers warranty on workmanship and defects. 1 year warranty on gas engines.

* * * * * * * * * * * * * *

UH-SVVT061: Super Vac 16", PPV, 3.5 HP Briggs and Straton Engine [716G4-B]
~~$1,550.00~~ $1,426.00 On Sale!
The 716 is designed to compact dimensions that fit the tightest pumper compartments. They feature the highest horsepower in their class for maximum airflow. Perfect for the department buying their first PPV or outfitting their entire fleet of engines. Outfitted with an economical Briggs and Straton engine.

The 16" gas positive pressure ventilator shall be supplied. The unit shall be cart style designed with rear mounted wheels, a full height frame, and a tilt-up, full width handle for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States.

The wheels shall be designed to engage as the unit is tilted for rolling to the scene. Once positioned at the scene, the unit shall sit on four cone-shaped rubber feet. The unit shall remain stationary while running at full speed.

The entire frame of the unit shall be constructed of steel that shall surround the shroud and the seven-blade 16" airfoil propeller in a roll cage design that shall enhance lifting and user safety. The blade shall be constructed of precision cast of aluminum alloy #A356. The blade shall be driven by the gas engine that shall have a direct drive connection. The blade shall be precision balanced and attached to the engine shaft with a split taper-lock bushing. Any ventilators utilizing belts, pulley, gears, or additional shafts shall not be acceptable.

The shroud and the safety grill shall be designed as to provide maximum air velocity. The positive pressure ventilator shall have a tilt control with four positions including one position that can direct airflow downward. The standard angle of air direction shall be 18 degrees above horizontal ground level and shall be equipped with a lever to set positions of the air flow to 20, 10, 0, and -10 degrees above and below horizontal level.

The front and rear safety guards shall be designed to OSHA and U.L. Standards to prevent accidental contact with the blade. The unit shall be tested to AMCA 240-95 for air movement and the air movement shall exceed 11,700 cubic feet per minute.

Weight: 60 lbs. [Shipping Weight 67 lbs]

RPM: 3,520, Angle: 18, CFM: 10,230

Depth/Width/Height: 16" x 20" x 20"

UH-SVVT057: Super Vac 18" Gas PPV, 6 Hp Tecumseh Engine [718G4-T]
~~$2,000.00~~ $1,840.00 On Sale!
The 718 is designed to compact dimensions that fit the tightest pumper compartments. They feature the highest horsepower in their class for maximum airflow. Perfect for the department buying their first PPV or outfitting their entire fleet of engines. Outfitted with an economical Tecumseh OHH60 over-head valve engine, with low oil alert.

The 18" gas positive pressure ventilator shall be supplied. The unit shall be cart style designed with rear mounted pneumatic wheels, a full height frame, and a tilt-up, full width handle for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States.

The pneumatic wheels shall be designed with a "one step" braking system utilizing a single foot operated brake pedal to assure positive engagement to prevent the unit from rolling during operation. The unit shall remain stationary while running at full speed.

The entire frame of the unit shall be constructed of steel that shall surround the shroud and the seven-blade 18" airfoil propeller in a roll cage design that shall enhance lifting and user safety. The blade shall be constructed of precision cast of aluminum alloy #A356. The blade shall be driven by the gas engine that shall have a direct drive connection. The blade shall be precision balanced and attached to the engine shaft with a split taper-lock bushing. Any ventilators utilizing belts, pulley, gears, or additional shafts shall not be acceptable.

The shroud and the safety grill shall be designed as to provide maximum air velocity. The positive pressure ventilator shall have a tilt control with four positions including one position that can direct airflow downward. The standard angle of air direction shall be 18 degrees above horizontal ground level and shall be equipped with a lever to set positions of the air flow to 20, 10, 0, and -10 degrees above and below horizontal level.

The front and rear safety guards shall be designed to OSHA and U.L. Standards to prevent accidental contact with the blade. The unit shall be tested to AMCA 240-95 for air movement and the air movement shall exceed 15,500 cubic feet per minute.

Engine Manufacturer: Tecumseh Gas Engine Model OHA60

Horsepower: 6HP, 4-cycle

Rotations per minute: 3770 RPM

Cubic feet per minute: 15,500

Dimensions: 18-3/4" deep x 22" wide x 20-3/4" high

Weight: 82 pounds

UH-SVVT058: Super Vac 18" 6.5 HP Honda Engine [718G4-H]
~~$2,450.00~~ $2,254.00 On Sale!
SEE above for complete description

The 718 is designed to compact dimensions that fit the tightest pumper compartments. They feature the highest horsepower in their class for maximum airflow. Perfect for the department buying their first PPV or outfitting their entire fleet of engines. Outfitted with a World Class Honda GX200 Over head valve engine, with low oil alert.

A Super Vac, part number #718G4-H, 18" gas positive pressure ventilator shall be supplied. The unit shall be cart style designed with rear mounted pneumatic wheels, a full height frame, and a tilt-up, full width handle for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States. <
Horsepower: 6.5HP, 4-cycle
Rotations per minute: 3535 RPM
Cubic feet per minute: 15,600
Dimensions: 18-3/4" deep x 22" wide x 20-3/4" high
Weight: 82 pounds

UH-SVVT063: Super Vac 20", PPV, 6.0 HP Tecumseh Engine [720G4-T]
~~$2,150.00~~ $1,978.00 On Sale!
The 720 is the perfect combination of small size and high power. They also feature the highest horsepower in their class and the exclusive roll cage frame design. Perfect for the department with a mixture of residential and small commercial structures in their district. Outfitted with an economical Tecumseh OHH60 over-head valve engine, with low oil alert.

The 20" gas positive pressure ventilator shall be supplied. The unit shall be cart style designed with rear mounted pneumatic wheels, a full height frame, and a tilt-up, full width handle for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States.

The pneumatic wheels shall be designed with a "one step" braking system utilizing a single foot operated brake pedal to assure positive engagement to prevent the unit from rolling during operation. The unit shall remain stationary while running at full speed.

The entire frame is constructed of steel that shall surround the shroud and the seven-blade 20" airfoil propeller in a roll cage design that shall enhance lifting and user safety. The blade shall be constructed of precision cast of aluminum alloy #A356. The blade shall be driven by the gas engine that shall have a direct drive connection. The blade shall be precision balanced and attached to the engine shaft with a split taper-lock bushing. Any ventilators utilizing belts, pulley, gears, or additional shafts shall not be acceptable.

The shroud and the safety grill shall be designed as to provide maximum air velocity. The positive pressure ventilator shall have a tilt control with four positions including one position that can direct airflow downward. The standard angle of air direction shall be 19 degrees above horizontal ground level and shall be equipped with a lever to set positions of the air flow to 20, 10, 0, and -10 degrees above and below horizontal level.

The front and rear safety guards shall be designed to OSHA and U.L. Standards to prevent accidental contact with the blade. The unit shall be tested to AMCA 240-95 for air movement and the air movement shall exceed 18,060 cubic feet per minute.

Engine Manufacturer: Tecumseh Gas Engine

Horsepower: 6.0HP, 4-cycle

Rotations per minute: 3385 RPM

Cubic feet per minute: 18,060 CFM

Dimensions: 18-3/4" deep x 24-1/2" wide x 25-1/2" high

Weight: 86 pounds [Shipping Weight 112 lbs]

UH-SVVT064: Super Vac 20", PPV, 6.5 HP Honda Engine [720G4-H]
~~$2,550.00~~ $2,346.00 On Sale!
SEE above for full desription

The 720 is the perfect combination of small size and high power. They also feature the highest horsepower in their class and the exclusive roll cage frame design. Perfect for the department with a mixture of residential and small commercial structures in their district. Outfitted with a World Class Honda GX200 over head valve engine, with low oil alert.

The 20" gas positive pressure ventilator shall be supplied. The unit shall be cart style designed with rear mounted pneumatic wheels, a full height frame, and a tilt-up, full width handle for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States.
Engine Manufacturer: Honda Gas Engine
Horsepower: 6.5HP, 4-cycle
Rotations per minute: 3350 RPM
Cubic feet per minute: 18,580 CFM
Dimensions: 18-3/4" deep x 24-1/2" wide x 25-1/2" high
Weight: 87 pounds [Shipping Weight 105 lbs]

UH-SVVT065: Super Vac 24", PPV, 9 HP Tecumseh Engine [724G4-T]
~~$2,450.00~~ $2,254.00 On Sale!
The 724 features larger engines and higher airflow than other fans. These units are serious work horses to make quick work of ventilating larger occupancies. Perfect for the department with a mixture of residential and mid-sized commercial structures in their district. Outfitted with an economical Tecumseh OHM90 over-head valve engine, with low oil alert.

The 24" gas positive pressure ventilator shall be supplied. The unit shall be cart style designed with rear mounted pneumatic wheels, a full height frame, and a tilt-up, full width handle for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States.

The pneumatic wheels shall be designed with a "one step" braking system utilizing a single foot operated brake pedal to assure positive engagement to prevent the unit from rolling during operation. The unit shall remain stationary while running at full speed.

The entire frame of the unit shall be constructed of steel that shall surround the shroud and the seven-blade 24" airfoil propeller in a roll cage design that shall enhance lifting and user safety. The blade shall be constructed of precision cast of aluminum alloy #A356. The blade shall be driven by the gas engine that shall have a direct drive connection. The propeller blade shall be precision balanced and attached to the engine shaft with a split taper-lock bushing. Any ventilators utilizing belts, pulley, gears, or additional shafts shall not be acceptable.

The shroud and the safety grill shall be designed as to provide maximum air velocity. The positive pressure ventilator shall have a tilt control with four positions including one position that can direct airflow downward. The standard angle of air direction shall be 19 degrees above horizontal ground level and shall be equipped with a lever to set positions of the air flow to 20, 10, 0, and -10 degrees above and below horizontal level.

The front and rear safety guards shall be designed to OSHA and U.L. Standards to prevent accidental contact with the blade. The unit shall be tested to AMCA 240-95 for air movement and the air movement shall exceed 21,770 cubic feet per minute.

Engine Manufacturer: Tecumseh Gas Engine

Horsepower: 9.0HP, 4-cycle

Rotations per minute: 3600 RPM

Cubic feet per minute: 21,770 CFM

Dimensions: 20-1/2" deep x 28-1/2" wide x 27-3/4" high

Weight: 119 pounds [Shipping Weight 129 lbs]

UH-SVVT066: Super Vac 24", PPV, 9 HP Honda Engine [724G4-H]
~~$3,050.00~~ $2,806.00 On Sale!
SEE above for description

The 724 features larger engines and higher airflow than other fans. These units are serious work horses to make quick work of ventilating larger occupancies. Perfect for the department with a mixture of residential and mid-sized commercial structures in their district. Outfitted with a World Class Honda GX270 over head valve engine, with low oil alert.
Engine Manufacturer: Honda Gas Engine
Horsepower: 9.0HP, 4-cycle
Rotations per minute: 3450 RPM
Cubic feet per minute: 20,230 CFM
Dimensions: 20-1/2" deep x 28-1/2" wide x 27-3/4" high
Weight: 125 pounds [Shipping Weight 139 lbs]

UH-SVVT067: Super Vac 30", PPV, 13 HP Honda Engine [730G4-H]
~~$3,850.00~~ $3,542.00 On Sale!
Super Vac 's 730 is the largest and most powerful, portable PPV available. It is capable of ventilating warehouses, high-rise buildings, and large retail outlets. Perfect for the department with larger commercial and public structures in their response area. Outfitted with a World Class Honda GX390 over head valve engine, with low oil alert.

A Super Vac, part number #730G4-H, 30" gas positive pressure ventilator shall be supplied. The unit shall be cart style designed with rear mounted pneumatic wheels, a full height frame handle for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States.

The pneumatic wheels shall be designed with a "one step" braking system utilizing a single foot operated brake pedal to assure positive engagement to prevent the unit from rolling during operation. The unit shall remain stationary while running at full speed.

The entire frame of the unit shall be constructed of steel and shall support the shroud and the six-blade 30" airfoil propeller to enhance lifting and user safety. The blade shall be constructed of precision cast of aluminum alloy #A356. The blade shall be driven by the gas engine that shall have a direct drive connection. The blade shall be precision balanced and attached to the engine shaft with a split taper-lock bushing. Any ventilators utilizing belts, pulley, gears, or additional shafts shall not be acceptable.

The shroud and the safety grill shall be designed as to provide maximum air velocity. The positive pressure ventilator shall have a tilt control with four positions including one position that can direct airflow downward. The standard angle of air direction shall be 19 degrees above horizontal ground level and shall be equipped with a lever to set positions of the air flow to 20, 10, 0, and -10 degrees above and below horizontal level.

The front and rear safety guards shall be designed to OSHA and U.L. Standards to prevent accidental contact with the blade. The unit shall be tested to AMCA 240-95 for air movement and the air movement shall exceed 26,840 cubic feet per minute.

Engine Manufacturer: Honda Gas Engine

Horsepower: 13.0HP, 4-cycle

Rotations per minute: 3510 RPM

Cubic feet per minute: 26,840 CFM

Dimensions: 27-1/2" deep x 37" wide x 38-3/4" high

[Shipping Weight 170 lbs] Must be Truck Freight

UH-SVVT068: Super Vac 16", PPV, 4 HP Honda Engine [GP164S]
~~$1,650.00~~ $1,518.00 On Sale!
The GP164 is the smallest gasoline powered fan in the industry. The versatile design features the ability to attach duct to the inlet or outlet side of the fan. Used by departments worldwide for many years the GP is a proven performer for departments where size and versatility are paramount.

The 16" gas positive pressure ventilator shall be supplied. The unit shall feature a square construction design for strength and stability. The unit shall be designed with two (2) top carrying handles on each corner for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States.

The positive pressure ventilator shall have four (4) stabilizing rubber feet to ensure the unit shall remain stationary while running at full speed.

The entire frame of the unit shall be constructed of steel and shall surround the seven-blade 16" airfoil propeller to enhance lifting and user safety. The blade shall be constructed of precision cast of aluminum alloy #713. The blade shall be driven by the gas engine that shall have a direct drive connection. The blade shall be precision balanced and attached to the engine shaft with a split taper-lock bushing. Any ventilators utilizing belts, pulley, gears, or additional shafts shall not be acceptable.

The unit shall be designed to attach a ventilation air duct to either the inlet or outlet side of the fan.

The front and rear safety guards shall be designed to OSHA and U.L. Standards to prevent accidental contact with the blade. The unit shall be tested to AMCA 240-95 for air movement and the air movement shall exceed 9,250 cubic feet per minute.

Engine Manufacturer: Honda GX120 Gas Engine

Horsepower: 4.0HP, 4-cycle

Rotations per minute: 2800 RPM

Cubic feet per minute: 9,250 CFM

Dimensions: 15-1/2" deep x 19" wide x 19-1/2" high

Weight: 55 pounds [Shipping Weight 58 lbs]

HOME

SHIPPING & ORDERING INFORMATION

GIFT CERTIFICATES