Ascenders: Rope Grabs

For Gibbs Ascenders/Rope Grabs, Click Back for GIBBS PAGE.
** ** ** ** ** ** ** ** ** **
products/UH-PZAS002-1.gif UH-PZAS002: Petzl NEW APRIL 2009 BASIC Rope Grab, Ascender for Rope, 8-13mm [B18AAA]
$54.95
  • Versatile: Progress capture during hauling, ascent on a fixed rope
  • Lower hole for connecting a lanyard
  • Upper hole through which a carabiner attaches the device to the rope
  • For use with single rope: 8-13mm (5/16" - 1/2")
  • Lightweight and compact, Weight: 135 g (.4 lbs)
  • 3 yr manufacturers guarantee, Made in France
  • CE certified EN 567

    • products\UH-PZAS003.jpg UH-PZAS003: Petzl RESCUCENDER Rope Grab, Removable Axle, 9-13mm [B50] 2 IN STOCK
    $61.95 $59.50 On Sale!

    MOST POPULAR ROPE GRAB WE SELL
    Intended for moving on fixed ropes (as a back-up belay), for hauling heavy loads, and as a progress capture device in hauling systems.
  • Slides easily up rope & jams when pulled down by the cam
  • Slides easily downwards when pulled down if the cam is held in
  • If overloaded or subjected to an impact force, the rope may slip through device
  • Locking pin gives greater safety: separation from the rope requires two separate actions
  • Individually tested, CE certified EN 567,
  • For use on ropes from 9 to 13mm, Weight: 250 g
  • Upgrade Kit & Repair Kit sold separately -call to order
    Colors: Gray (As shown) or [Black - Add'L $2 fee]

    • products\UH-PMRG011.jpg UH-PMRG011: PMI MIO Rope Grab for Kernmantle Rope, choices [HD26114 Series]
    $179.00
    Exceeds OSHA requirements for personal fall protection equipment with or without a force absorbing lanyard. This highly effective self trailing rope grab grips automatically in the event of a fall and dissipates the energy of the fall by slipping along the rope.
  • When used within OSHA guidelines on Approved ropes, the amount of slip/impact force remain well within OSHA requirements.
  • This non-destructive action is highly preferred over force absorbing lanyards that tear or rip
  • Stainless stell construction for corrosion resistance and durability
  • Removable dual-action pin allows easy placement of the rope grab anywhere along the length of the rope
  • Weight: 1.38 lbs. (672g)
    Choices: Use with 7/16" Rope (Pin color yellow), Use with 1/2" Rope (pin color blue), or Use with 5/8" Rope (pin color black)

    		•
    products/UH-PZAS009.jpg UH-PZAS009: Petzl MICROGRAB Rope Grab, Bolted Axle Rope Grab, 9-13mm [B53]
    $59.95 $56.50 On Sale!
    Intended for moving on fixed ropes (as a back-up belay), for hauling heavy loads, and as a progress capture device in hauling systems.
  • Very secure attachment to the rope: installation is done by threading one end of the rope through the device, thus greatly reducing the chance of accidental disconnection from the rope.
  • Can replace a Prusik hitch for making an adjustable lanyard.
  • Very compact and lightweight
  • Slides easily up the rope and jams when the cam is loaded
  • Slides easily downwards if the cam is prevented from engaging
  • If overloaded or subjected to an impact force, the rope may slip through the device
  • Individually tested, Weight: 175g, For use on single rope from 9 to 13mm

    • products/UH-PZAS010.jpg UH-PZAS010: Petzl MICROCENDER Rope Grab, Removable Axle Rope Grab, 9-13mm [B54]
    $57.95 $55.50 On Sale!
    Intended for moving on fixed ropes (as a back-up belay), for hauling heavy loads, and as a progress capture device in hauling systems.
  • Very compact and lightweight
  • Slides easily up the rope and jams when the cam is loaded
  • Slides easily downwards if the cam is prevented from engaging
  • If overloaded or subjected to an impact force, the rope may slip through the device
  • Locking pin resists accidental disconnection of the device from the rope
  • Individually tested, Weight: 162g, For use on single rope from 9 to 13mm
  • Repair Kit sold separately [B54 RK] $5.95 each
    Colors: Red (as shown) or [Black - Add'L $2 fee]

    • products/UH-GERG002.jpg UH-GERG002: Gemtor Rope Grab, SS Energy Absorbing, with Snaphook Compatible Connection Ring, for 5/8 - 3/4" Synthetic Rope Lifelines [VF505]
    $94.00 $89.50 On Sale!
    Automatic energy absorbing rope grab follows a worker up and down a 5/8"- 3/4" diameter vertical synthetic lifeline. The unit's controlled, shock-absorbing action eliminates the need for an energy absorbing lanyard. The patented design allows the rope grab to be attached, detached and positioned at any point on the vertical lifeline. Weighs 1 1/2 lbs. and is made of stainless steel. New York State Approval #9502
    Other Available Models:
    VF505WL2 - Model # VF505 rope grab with permanently attached 2' long x 1" wide polyester web lanyard with Model # 3155 locking snaphook.
    VF505WL3 - Same as above except 3' long.

    products/UH-MSRG001.jpg UH-MSRG001: MSA Rope Grab Fall Arrester [10054077]
    $120.45
    Moves freely up or down an approved 5/8” (16 mm) diameter lifeline. When sudden downward movement occurs, a camming lever is activated arresting the fall. It can be installed or removed from the lifeline at any point along its length.
    Meets and exceeds ANSI Z359.1 and OSHA standards and is CSA certified. Hazards, Falling From Heights

    Provides temporary fall protection on ladders or when climbing vertical structures, as well as a secondary lifeline for suspended positioning systems used by building/structure inspectors, window cleaners and maintenance personnel.
    products/UH-MSRG002.jpg UH-MSRG002: MSA FP Pro Rope Grab with 3' Dyna-Brake Lanyard [415940]
    $182.55
    A fall arrest device that travels up and down a 5/8" vertical lifeline rope. Locks onto rope through a cam design to lock a fallen worker in place on lifeline.
    Approvals & Standards: Meets applicable OSHA and ANSI standards.

    Offers hands-free operation and ultra-smooth travel action while ascending or descending. The cam and hinge design allows for quick, easy installation on the rope. Unique, versatile, lightweight and affordable, the FP Pro rope grab is available with either polyester or polyester/polypropylene blend rope.
  • Weight: approx. 3.5 lbs.

    • products/UH-PZPY016.jpg UH-PZPY016: Petzl Pro Traxion Self Jamming Pulley, 8 to 13mm [P51]
    $130.00 $120.00 On Sale!
    For effective and comfortable hauling of heavy loads. Very effective as a progress capture device for travel along a Tyrolean traverse. Large diameter (38 mm) sheave mounted on sealed ball bearings for high efficiency. Moving sideplate allows the rope to be installed when the device is attached to the anchor. Chrome-plated steel cam has inclined teeth and self-cleaning slots to provide grip on wet, icy or muddy ropes. Auxiliary attachment point can be used to build different types of pulley systems.
  • Breaking strength/used as pulley only: 11 kN x 2 =22 kN
  • Working load/used as pulley only: 3 kN x 2 = 6 kN
  • Breaking strength/used as selfjamming pulley: 4 kN
  • Working load/used as self-jamming pulley: 2.5 kN
  • For ropes from 8 to 13mm, Weight: 265 g (.7 lbs.)
  • Individually tested, CE EN 567 & EN 12 278

    • products/UH-PZPY015.jpg UH-PZPY017: Petzl Mini Traxion, Pulley/Rope Grab, 8 to 13mm [P07] 2 IN STOCK
    $84.95 $81.50 On Sale!
    A multipurpose 3-in-1 device (pulley, self-jamming pulley, rope clamp/grab) for hauling a sack, raising a person, setting up a hauling system or selfbelaying. Sheave with self-lubricating bushings is efficient and compact. Chrome-plated steel cam has inclined teeth and self-cleaning slots to provide grip on wet, icy or muddy ropes. Efficiently replaces the traditional pulley system set-up: pulley + carabiner + rope clamp/grab. Works well for Tyrolean traverses & for ascending rope...
  • Breaking strength/used as pulley only: 10 kN x 2 = 20 kN.
  • Working load/used as pulley only: 2.5 kN x 2 = 5 kN.
  • Breaking strength/used as self-jamming pulley: 4 kN.
  • Working load/used as self-jamming pulley: 2.5 kN.
  • For ropes from 8 to 13mm in diameter, Weight: 164g
  • Individually tested, CE EN 567 & EN 12 278

    • products/UH-PMRG017.jpg UH-PMRG017: PMI, Heightec Rescue Hauler, Haul Cam-pulley combo, Stainless Steel, Rope Grab [HD26186]
    $195.00
    The Haul Cam allows attachment of a pulley system at any point along a loaded rope creating an instant mechancial advantage. An integral component of ScaffPack and RescuePack (See Rescue Kits).
  • Stainless Steel Body Stainless Cam
  • Nylon Sheave

    • products/UH-PMRG018.jpg UH-PMRG018: PMI, SMC Grip, Rope Grab [SM220500N]
    $65.00
    This rope grab is a solid, compact performer that can be used as a ratchet or to grip a kernmantle rope whenever reliability and care are priorities. The compact curved body is easy to grip, and the secure, user friendly release mechanism makes putting this rope grab onto any rope - loaded or unloaded - a breeze. A specifically designed cam protects your rope in the event of unexpectted loading, but this unit is not designed as a belay or fall protection device.
  • Ropes up to 13mm
  • Anodized aluminum
  • Weight: 6.72 oz (191g)

    Colors: Gold or Charcoal

    		•
    products/UH-PMRG019.jpg UH-PMRG019: PMI, Heightec x-Cam Rescue Compact, Stainless Steel Rope Grab [HD26197]
    $74.00
    It attaches to wire fall arrest block, rope or rope lanyard. Once attached it can be slid down to the subject for a secure connection in a variety of situation in a variety of situations.
  • Stainless Steel
  • Attaches to wire or rope

    • products/UH-PMRG020.jpg UH-PMRG020: PMI, Heightec Pulsar Ascender, Rope Grab [HD26183]
    $65.50
    Aluminum, Right
    The X-Cam is a completely new ascender cam design. Increased performance over traditional sharp toothed modesl, it signifcantly reduces the posibility of complete system failure by exerting a considerable hold on a rope with the sharp teeth that may damage the sheath of the rope.
  • Comfortable profiled grip
  • 2 lower attachment points to separate lanyard & footloop
  • One upper attachment point
  • Shaped for optimum pulling position
  • Weight: 7.8 oz. (220g)

    		•
    products/UH-PMRG021.jpg UH-PMRG021: PMI, X-CAM COMPACT Ascender, Rope Grab [HD26184]
    $58.00
    The same revolutionary cam as the X-Cam Ascender, but without a handle. Ideal for a spare ascender or for use in haul systems.
  • Does not fuzz sheath when placed on and off the rope
  • Easy removal for change over
  • Smooth action for down climbing
  • Two lower and one upper attachment point
  • Alloy release catch
  • Weight: 6.1 oz (175g)

    • products/UH-PMRG022.jpg UH-PMRG022: PMI, X-CAM TWIST Ascender, Rope Grab [HD26185]
    $57.00
    Slimline X-Cam ascender with porfiled attachment points to sit flat on the chest. Can be used iwht a combination harness or separate chest harness for rope ascending.
  • Does not fuzz sheath when placed on and off the rope
  • Easy removal for change over
  • Smooth action for down climbing
  • One lower and upper attachment point
  • Alloy release catch
  • Weight: 5.6 oz. (160g)

    • products/UH-PMRG023.jpg UH-PMRG023: PMI, Heightec POWERLOCK Kit Static with Isostatic Rope 46M or 92M, Breaking Device [KT36131 / KT36132]
    $344.00
    It is a revolutionary evacuation descender designed for two person loads. A double action safety mechanism brakes it the user either lets go or squeezes too hard in panic. This device can also easily adjust the amount of slack rope prior to descent and provides excellent braking control, even with a load of two persons.
  • Stainless steel
  • Patented secondary braking system
  • Powerlock Weight: 1.67 lbs. (760g)

    CHOICES: 46M or 92M Polyester rope (Add'L $145 fee for 92M)

    • products/UH-PMRG024.jpg UH-PMRG024: PMI, Heightec QUADRA Kit Static, Breaking Device with 11mm Isostatic Rope, 46M or 92M [KT36129 / KT36130]
    $344.00
    The Quadra can change instantly from one mode to another while under load. A special braking mechansom increases the frictional force for lowering heavy loads. This device will arrest a 2 person fall factor by 1/3 when in lifelining mode with no rope damage. It will also retain full function after a fall.
  • Pantended secondary braking system.
  • Component of our RescuePack and ScaffPack casualty recovery systems.
  • Stainless Steel
  • Powerlock Weight: 1.54 lbs. (695 g)

    CHOICES: 46M or 92M Polyester rope (Add'L $145 fee for 92M)

    • products/UH-PMRG025.jpg UH-PMRG025: PMI, Heightec PRISM, Breaking Device [HD26181]
    $183.00
    The Prism descender is a completely new product which offers new functionality to rope access workers. It contains two new patended princples; a mechanism which multiples the braking force applied by the user providing fine control and a new design of a secondary brake which minimizes the possibility of uncontrolled descent. An additional important feature of this device is the ability to unthread the secondary braking system, which allows the rope to be easily pulled back through the device short ascents.
  • Versatile, Secondary panic lock, Smooth descent
  • Extra bollard for variable friction while loaded
  • Can be loaded while attached to harness
  • Weight: 1.1 lbs. (500 g)
  • MBS: 36 kN (8036 lbf)

    		•
    products\UH-PZAS006.jpg UH-PZAS006: Petzl MACROGRAB Rope Grab, Bolted Axle Rope, 12-19mm [B52]
    $65.95
    Identical characteristics to the MICROGRAB. Intended for moving on fixed ropes (as a back-up belay), for hauling heavy loads, and as a progress capture device in hauling systems.
  • Locking system which makes it necessary to thread one end of the rope through the device to avoid accidental separation from the rope.
  • Replaces a Prusik knot for improvising an adjustable lanyard.
  • Very compact and lightweight.
  • Slides easily up the rope and jams when pulled down by the cam.
  • Slides easily downwards when pulled down if the cam is held in.
  • If overloaded or subjected to an impact force, the rope may slip through the device.
  • Individually tested
  • For use on ropes from 12 to 19 mm.
  • Weight: 335 g
  • CE certified EN
  • Repair Kit sold separately [B52 RK] $5.95 each

    • products/UH-PMAS003.jpg UH-PMAS003: HEIGHTEC-PMI Ascender Compact Ascender[HD26184]
    $57.25
    Updated, Sleek & Definately heightec, these ascenders feature the patented X-Cam mechanism. The X-Cam offiers unparalleleded gripping action without compromising the strength of your rope.
    products/UH-PMAS004.gif UH-PMAS004: HEIGHTEC-PMI Ascender Twist Ascender [HD26185]
    $56.50
    Updated, Sleek & Definately heightec, these ascenders feature the patented X-Cam mechanism. The X-Cam offiers unparalleleded gripping action without compromising the strength of your rope.
    products/UH-PZAS001-1.gif UH-PZAS001: Petzl NEW APRIL 2009 VERSION - CROLL Rope Grab Ascender for Rope, 8-13mm [B16]
    $56.95 $54.95 On Sale!
  • Used with the Ascention for ascending rope.
  • New cam facilities passage of the rope through device, even on the first meters
  • Cam is totally integrated into the body of the rope clamp to help prevent rubbing
  • Thumb catch can be pinched for easy manipulation when the clamp is in position
  • Angled ttachent fole allows the device to lie flat against the abdomen
  • Used with Secur should strap to keep the ascender in position
  • For use on single rope: 8-13mm (5/16" - 1/2")
  • CE certified EN 567 / CE EN 12841 type B
  • Weight: 130 g, Made in France, 3 yr guarantee
  • Aluminum frame, chrome-plated steel cam, nylon catch

    • UH-YTDS008.jpg UH-YTDS008: Yates NEW 2010 Kong Back-Up Fall Arrestor [800]
    $155.00
    A new mobile fall arrester from Kong that follows the operator in both directions. With its unique locking cam configuration, the Back-Up supports fall factor 2 falls in a semi-dynamic way, without damage to the safety rope.
  • Stops a fall, slide or uncontrolled descent
  • Works on vertical or angled rope
  • Moves up or down along the rope without manual intervention
  • Easy to install and remove at any point on the rope
  • For rope access applications unit can be used with tug cord
  • Meets ANSI Z359.1-2007 and OSHA requirements in North America.
  • Certified to CE EN 353-2, EN 358, EN 567.
  • Lazer marked ANSI Z359.1-2007.
  • 10.0 to 12.0 mm semi-static ropes (EN 1891 type A) certified with the device
  • Comes with the Kong Steel Oval auto locking carabiner 205g + carabiner (180g) 385g. total

    If used for fall protection, to meet ANSI and EN requirements, Back-Up must be used without a lanyard or in conjunction with a lanyard (included with the Back-up) under 40 cm (16 inches) to limit maximum potential fall distance to less than 1 meter.

    •  
    MID YEAR CLEARANCE
    Contact Urban HART Email Urban HART
    HOME SHIPPING & ORDERING INFORMATION GIFT CERTIFICATES