|
|
Principles of Operation
Consisting of a hood, facepiece with lens housing, breathing tube, lens cartridge, flow-control device, air-supply hose and support belt, the Abrasi-Blast Respirator can be designed for diverse applications by varying individual components.
Approvals & Standards
The Abrasi-Blast Respirator has the following NIOSH/MSHA approvals: " Approval TC-19C-161 for Abrasi-Blast Respirator when used with 8 to 50 ft. of MSA Air-Supply Hose at an inlet pressure of 10 to 15 psig. " Approval TC-19C-162 for Abrasi-Blast Respirator when used with 8 to 300 ft. of MSA Air-Supply Hose at an inlet pressure of 35 to 40 psig. " Approval TC-19C-178 (cool only) for Abrasi-Blast Respirator with vortex tubes. " Approval TC-19C-236 for Abrasi-Blast Pressure-Demand Respirator. " Duo Flow Abrasi Blast - see NIOSH Approved Matrix, PN 818148
Applications: Construction, Electric Utility, Nuclear, Paper & Pulp, Sand Blasting, Shipbuilding
Hazards: Toxic Atmosphere Non-IDLH
Product Information
The Abrasi-Blast respirator provides respiratory and upper body protection for workers in shipbuilding, the construction industry, utilities and other applications where blasting with abrasives is performed. A complete Abrasi-Blast respirator is made up of a hood, facepiece with lens housing, breathing tube, cover lens cartridge assembly, flow-control device, approved air-supply hose and support belt. During blasting operations, the lens of the Abrasi-Blast respirator is protected by two to four flat glass cover lenses mounted in a special foam material. Each cover lens is removed by integral pull tabs when it becomes so abraded that vision is reduced, eliminating the need to stop and change lenses, as is necessary with most conventional blasting hoods. Complete assemblies include one lens cartridge consisting of four 0.06-inch untempered glass cover lenses, flow-control device, Snap-Tite aluminum quick-disconnect fitting, adjustable valve-connector body or pressure-demand regulator (with socket assembly), facepiece (medium) with dual-exhalation valves and lens housing, breathing tube, web-belt and air-hose connector.
|
|
