Breathing Systems: MSA Powered Air-Purifying OptimAir PAPR Respirators
NEW FOR 2007

NEW PRODUCTS - NOW AVAILABLE!
The OptimAir 6A powered air-purifying respirator (PAPR) provides respiratory protection by filtering contaminants from ambient air and providing air flow to either a facepiece or hood (with HEPA filters only) at a rate equal to or exceeding National Institute for Occupational Safety and Health (NIOSH) standards.

Approvals & Standards: The OptimAir 6A powered air-purifying respirator (PAPR) with Ultravue, Comfo, Comfo Elite, or Comfo Welder's facepieces or Tyvek hood has approvals from the National Institute for Occupational Safety and Health (NIOSH) and the Mine Safety and Health Administration (MSHA). Filters and cartridges are covered by separate approval. Cartridges must be replaced whenever air flow drops below four cubic feet per minute (115 lpm) with tight-fitting facepieces, six cubic feet per minute (170 lpm) with the Tyvek hood or when the user smells or tastes the contaminant.

Applications: Asbestos Abatement, Chemical, Electric Utility, Hazardous Materials, Nuclear, Oil & Gas, Paper/Pulp, Sanding/Grinding

Hazards: Particulate/Dust, Toxic Atmosphere, Non-IDLH, Welding

The OptimAir 6A powered air-purifying respirator (PAPR) can be used with an entire family of filters, chemical cartridges and combination cartridges for protection against particulates, toxic gases and vapors or a combination of these hazards. Requiring two filters, the unit is available with full- or half-mask facepiece, or hood. The belt-mounted motor/blower assembly includes an efficient 4.6 volt motor which has a long service life. The motor/blower assembly features threaded connectors for quick and easy attachment of OptiFilter cartridges.

** ** ** ** ** ** ** **

UH-MSRS017: OptimAir 6A PAPR Powered Air-Purifying Respirators with Black Hycar Ultravue Facepiece, Medium [494236]
~~$130.40~~ $123.50 On Sale!
Assembly includes motor/blower module, NiCad Battery, facepiece, breathing tube, belt, and battery charger.

Principles of Operation
The OptimAir 6A powered air-purifying respirator (PAPR) provides respiratory protection by filtering contaminants from ambient air and providing air flow to either a facepiece or hood (with HEPA filters only) at a rate equal to or exceeding National Institute for Occupational Safety and Health (NIOSH) standards.

Approvals & Standards: The OptimAir 6A powered air-purifying respirator (PAPR) with Ultravue, Comfo, Comfo Elite, or Comfo Welder's facepieces or Tyvek hood has approvals from the National Institute for Occupational Safety and Health (NIOSH) and the Mine Safety and Health Administration (MSHA). Filters and cartridges are covered by separate approval. Cartridges must be replaced whenever air flow drops below four cubic feet per minute (115 lpm) with tight-fitting facepieces, six cubic feet per minute (170 lpm) with the Tyvek hood or when the user smells or tastes the contaminant.

The OptimAir 6A powered air-purifying respirator (PAPR) can be used with an entire family of filters, chemical cartridges and combination cartridges for protection against particulates, toxic gases and vapors or a combination of these hazards. Requiring two filters, the unit is available with full- or half-mask facepiece, or hood. The belt-mounted motor/blower assembly includes an efficient 4.6 volt motor which has a long service life. The motor/blower assembly features threaded connectors for quick and easy attachment of OptiFilter cartridges.

Size: Medium ONLY

UH-MSRS020: OptimAir MM 2K PAPR Powered Air-Purifying Respirators, Advantage 3100 PAPR [10034152 Series]
~~$561.30~~ $505.00 On Sale!
Assembly includes motor/blower module, NiMH Battery, dual-rate battery charger, cable, one Type HE OptFilter XL Cartridge, belt, and choice of Advantage 3100. Ultravue or Ultra Elite Facepiece.
Principles of Operation
The respirator filters particulates and provides a constant flow of respirable air directly to the Advantage 3000 Ultravue® or Ultra Elite® facepiece. Because it does not have a breathing tube, the unit is more compact than other powered air-purifying respirators (PAPRs), enhancing user maneuverability and simplifying decontamination.
Approvals & Standards: Meets National Institute for Occupational Safety and Health (NIOSH) approval TC-21C-0758.

Well suited for abatement, nuclear, and other industries with hazardous particulate environments. The water-resistant filter has an optional prefilter and cover. Complete units include motor/blower, nickel metal hydride (NiMH) battery, dual-rate charger, one Type HE OptiFilter XL cartridge, belt and choice of Ultravue, Ultra Elite facepiece or Advantage 3000. The low-profile NiMH battery pack is lightweight (12.5 oz.), fits close to the body, and is small enough to fit in most pockets. The battery provides eight hours of continuous use, lasting a full work shift. NiMH batteries do not have a "memory effect" like NiCd batteries. The sealed, water-resistant battery pack is designed for easy shower decontamination. The dual-rate smart charger is a standard accessory with this unit. The charger can recharge a battery in less than three hours. An LED indicates battery condition.

SIZES: Small, Medium or Large
CHOICES: Rubber Harness or Advantage Harness

UH-MSRS081: OptimAir TL PAPR Powered Respirator Kit, for Hoods, Stnd Battery NEW 10/07! [10081116]
~~$861.00~~ $774.90 On Sale!
MSA's new OptimAir TL PAPR packaged in a sleek new design offers smart features never before provided in a PAPR. Enhanced motor blower electronics automatically sets optimum air flow without sacrificing user comfort. The TL compact and ergonomic battery pack is lightweight and comfortable. Smart design features permit fast, accurate change-out of cartridges, hoods, and batteries. Applications include HazMat cleanup, asbestos, mold and lead paint abatement, chemical processing, pharmaceutical plants, and nuclear facilities. The OptimAir TL PAPR is approved by NIOSH.

Visible alarms shall consist of flashing LEDs and indicate low flow and low battery condition.

Audible alarms for low flow and low battery condition should have separate and distinct tones.

The blower should incorporate a pressure sensor and adjust flow to compensate for change in altitude.

Blower on/off switch: Hold-down delayed on/off switch for protection against accidental shut off.

PAPR shall include battery, cartridges, and blower all contained within a single housing.

Electronics: Unit’s “Smart” features shall set flow rates automatically through built-in sensors in cartridge receptacle and hose connection port.

A Decon belt capable of easy decontamination shall be offered.

Accessories available shall include:

Comfort belt, Shoulder straps, Flow check device, Protective cover for cartridge receptacles, Decon cover for blower and hose (clear and yellow), Cover lenses for hoods

Power Source/Operating Time:

There should be a choice of batteries as follows:

NiMH, 12 volt nominal, 2.7 ah or

LiIon, 14.4 volt nominal 4.4 ah

Charger Smart – rapid charger must fully charge depleted battery pack in under 4 hours.

Charger shall have LED state-of-charge indicator lights.

It shall operate a minimum of 5 hours on a fully-charged battery with particulate filters and standard battery.

Design: The battery must be designed so that it can be inserted into the housing in only one orientation.

Blower Features:

Dimensions shall not exceed 10.5” W x 7.5” H x 3” D.

Weight: shall not be more than 1.3 lbs.

Blower housing shall be gray.

Has top-side breathing hose entry and hose shall be crush-proof.

Cartridge receptacles shall be 4.5” in diameter

Combination cartridge switch shall be mounted within one of the cartridge receptacles

Hood Features:

Made of Tychem QC or SL material.

Available in single or double bib.

Available with threaded hose-to-hood connections

Tychem QC hood shall be available in white or yellow.

Suspension is adjustable with replaceable sweatband.

Hood lens shall be no less then 7.5” x 12.5”.

Cartridge Features:

Has a plastic body.

Cartridge is available with HE (high-efficiency) filter and combination type.

Options: HE, Acid gas/organic vapor + HE, Acid gas/ammonia/formaldehyde + HE
Certifications: Manufacturer must certify an APF of 1,000 for use with hoods.
Approvals: All hood materials, styles, and configurations shall be NIOSH-approved

Warranties: All components - One-year standard warranty on all components.

CALL FOR QUOTE AND SPECS - Email us and we can send information by email or fax

We also sell MSA Accessories for Respirators, Replacement Parts, Assemblies, Adapters, Supply Hoses, Hoods, Filters, Cartridges, Plugs, Valves, Straps & Harness Kits, etc. To purchase these items please send us an email or all us for pricing. Thank you.

HOME

SHIPPING & ORDERING INFORMATION

GIFT CERTIFICATES

Breathing Systems: MSA Powered Air-Purifying OptimAir PAPR Respirators NEW FOR 2007

Breathing Systems: MSA Powered Air-Purifying OptimAir PAPR Respirators
NEW FOR 2007