Descenders: NFPA Rack Kits

CMI Rescue Racks are designed along the lines of the original "super rack." They come pre-rigged with six bars, five straight slotted stainless steel and an oversize aluminum top bar to aid in locking off.

CMI Sport Racks are available with the eye either parallel or at 90 degrees to the bars. They feature welded eye construction; welds are Zyglo inspected to insure reliability. Versatile 6 bar configuration comes pre-rigged with angle slotted bars that snap in place. Racks and bars can be purchased seperately.

** ** ** ** ** ** ** ** ** ** **
products/UH-PMDS008-01.jpg UH-PMDS008-01: PMI SMC NFPA Rappel Rack Kit [SM14001N Series]
$105.00 $99.75 On Sale!
BEST SELLER!
SMC’s new version of the NFPA rack has larger diameter brake bars than the previous model. Gone is the connector plate.
The NFPA CERTIFIED rack is sold only as a complete kit, including: one six-bar rappel rack, one stainless steel tie-off bar, one anodized aluminum grooved straight slot bar and four anodized aluminum angled brake bars.

Choices: Rack Kit or Twisted Eye Rack Kit

products/UH-CMDS003.jpg UH-CMDS003: CMI NFPA Rescue Rack with Hyperbar [RRACKBNFPA]
$102.55 $97.00 On Sale!
CMI Sport Racks are formed from 3/8" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. In order to compensate for the reduced friction inherent in stainless bars, we increased the radius of the friction surface to a full 1/2". The result is a longer wearing bar with maximum control. With the "open back" style of the bars featured on CMI Rappel Racks, improper rigging is easier to spot which aids in accident avoidance.

CMI Rescue Racks are designed along the lines of the original "super rack." They come pre-rigged with six bars, five straight slotted stainless steel and an oversize aluminum top bar to aid in locking off.
  • Material: T-304 Stainless Steel
  • Weight (with bars): 760g (1lb 11oz)
  • Overall Length: 40.6cm (16in)

    • products/UH-CMDS003.jpg UH-CMDS004: CMI NFPA Rescue Rack [RRACKB1NFPA]
    $73.55 $69.85 On Sale!
    CMI Sport Racks are formed from 3/8" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. In order to compensate for the reduced friction inherent in stainless bars, we increased the radius of the friction surface to a full 1/2". The result is a longer wearing bar with maximum control. With the "open back" style of the bars featured on CMI Rappel Racks, improper rigging is easier to spot which aids in accident avoidance.

    CMI Rescue Racks are designed along the lines of the original "super rack." They come pre-rigged with six bars, five straight slotted stainless steel and an oversize aluminum top bar to aid in locking off.
  • Material: T-304 Stainless Steel
  • Weight (with bars): 760g (1lb 11oz)
  • Overall Length: 40.6cm (16in)

    • products/UH-CMDS007.jpg UH-CMDS007: CMI NFPA HyperRack Extreme [HYRACKEXNFPA]
    $82.15 $77.95 On Sale!
    The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Prerigged with two fixed bars and two straight-slotted bars.

    Our HyperBars, a solid anodized aluminum bar with a single lock-off pin, allow for easier and safer lock offs. The HyperRack includes a single HyperBar. Our new Hyper Rack Extreme adds a second, opposing Hyper Bar. Two lock off pins on the same side of the rack make the Hyper Rack Extreme even easier to lock and unlock.

    products/UH-CMDS012.jpg UH-CMDS012: CMI Rappel Racks, Sport Rack, NFPA [SRACK1BNFPA]
    $78.60 $74.70 On Sale!
    CMI Sport Racks are formed from 3/8" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. In order to compensate for the reduced friction inherent in stainless bars, we increased the radius of the friction surface to a full 1/2". The result is a longer wearing bar with maximum control. Due to the "open back" style of the bars featured on CMI Rappel Racks, improper rigging is easier to spot which aids in accident avoidance.

    CMI Sport Racks are available with the eye either parallel or at 90 degrees to the bars. They feature welded eye construction; welds are Zyglo inspected to insure reliability. Versatile 6 bar configuration comes pre-rigged with angle slotted bars that snap in place. Racks and bars can be purchased seperately.
  • Material: T-304 Stainless Steel
  • Weight (with bars): 840g (1lb 14oz)
  • Overall Length: 49.5cm (19 1/2in)

    Choices: 90 degree Eye or Standard Eye

    • UH-CMDS020: CMI Rappel Racks, HyperRack, NFPA [HYRACKNFPA]
    $69.50 $66.00 On Sale!
    The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Prerigged with two fixed bars and two straight-slotted bars.

    Our HyperBars, a solid anodized aluminum bar with a single lock-off pin, allow for easier and safer lock offs. The HyperRack includes a single HyperBar. Our new Hyper Rack Extreme adds a second, opposing Hyper Bar. Two lock off pins on the same side of the rack make the Hyper Rack Extreme even easier to lock and unlock.

    Contact Urban HART Email Urban HART
    HOME SHIPPING & ORDERING INFORMATION GIFT CERTIFICATES