Descenders: Bars / Rack Frames

UH-BMDS012: BMS Retro-Hyper-Bars for SMC Racks $22.00 Provides Safer and Easier Lock Off Increases Frictional Range for Greater Control Heavy Wall Stainless Tube for Long Life & Smooth Control Offset Design for Increased Strength & Rope Contact Area Made to Close Tolerances for Exact Alignment to Frame Eliminates Top Bar Skew	UH-BMDS013: BMS Tubular Bars for SMC Frames $15.75 Provides Safer and Easier Lock Off Increases Frictional Range for Greater Control Heavy Wall Stainless Tube for Long Life & Smooth Control Offset Design for Increased Strength & Rope Contact Area Made to Close Tolerances for Exact Alignment to Frame Eliminates Top Bar Skew
UH-BMDS014: BMS Extra Heavy Grooved idiot Bar (SMC) $23.65 Extra Heavy Grooved Idiot Bar (SMC)	UH-BMDS015: BMS Micro-Rack Bars: Hyper-Bar $17.35 Micro-Rack Hyper-Bar
UH-BMDS016: BMS Micro-Rack Bars: Swing-Bar $13.40 Micro-Rack Swing-Bar	UH-BMDS017: BMS Micro-Rack Bars: Slide-Bar $11.00 Micro-Rack Slide-Bar
$products\uh-pmds009.jpg$ UH-PMDS016: PMI SMC Brake Bar Rack Frame, Stainless Steel Straight Eye, 6 bar capacity [SM13002] ~~$41.35~~ $39.25 On Sale! Type #304 Stainless steel construction, with a welded eye for extra strength. Each eye weld is inspected for dye penetration before shipping. Average tensile is over 10,000 lbs. Weight: 14.8 oz. (420g) Choices: Straight Eye, 6 Bar Capacity or SMC 90 SS Degree twist	$products\UH-PMDS011.jpg$ UH-PMDS017: PMI SMC Brake Bar Rack Frame Stainless Steel with 90 Degrees Twist[SM13502] ~~$41.35~~ $39.25 On Sale! Type #304 Stainless steel construction, with a welded eye for extra strength. Each eye weld is inspected for dye penetration before shipping. Average tensile is over 10,000 lbs. Weight: 14.8 oz. (420g) 90 Degree Eye, 6 Bar Capacity
$products\UH-PMDS019.jpg$ UH-PMDS019: PMI SMC 7/8" Brake Bar, Anodized with Angled Slot [SM12201] ~~$7.90~~ $7.50 On Sale! Extra large 1 inch diameter aluminum bar. We recommend the use of one of these as your first or top bar. The extra mass acts as a heat sink and the training groove helps keep the rope centered in your rack. Use only top bar per rack. Weight: 1.9 oz (54g)	$products\UH-PMDS019.jpg$ UH-PMDS020: PMI SMC 7/8" Brake Bar, with Groove, Anodized, Straight Slot [SM12401] ~~$9.05~~ $8.60 On Sale! Extra large 1 inch diameter aluminum straight slot bars. We recommend the use of one of these as your first or top bar. The extra mass acts as a heat sink and the training groove helps keep the rope centered in your rack. Use only top bar per rack. Weight: 1.9 oz (53g)
$products\UH-PMDS019.jpg$ UH-PMDS021: PMI SMC 7/8" Top Brake Bar, Stainless Steel Training Groove [SM11000] ~~$46.25~~ $43.90 On Sale! Machined from solid stainless steel rod stock, this 7/8" top bar is designed to stay on your rack and virtually last forever. Has machined groove to keep the rope centered. Core frill out keeps this bar cool and lightweight. Use only top bar per rack. Weight: 4.1 oz. (116g) We also carry Solid Aluminum 7/8" [SM12605] for $10.00 - Call to order	$products\UH-PMDS023.jpg$ UH-PMDS023: PMI SMC 3/4" Brake Bar, Stainless Steel [SM12500] ~~$9.80~~ $9.30 On Sale! Angled slot brake bars made from stainless steel sheet formed in a "U" shape. Stainless steel bars will not leave aluminum streaks on your rope and will last longer than aluminum bars. Available with and without training groove. Weight 1.7 oz. (48g)
$products\UH-PMDS023.jpg$ UH-PMDS024: PMI SMC 3/4" Brake Bar with Training Groove, Stainless Steel [SM12501] ~~$9.80~~ $9.30 On Sale! Angled slot brake bars with groove. Made from stainless steel sheet formed in a "U" shape. Stainless steel bars will not leave aluminum streaks on your rope and will last longer than aluminum bars. Available with and without training groove. Weight 1.7 oz. (48g)	$products\UH-PMDS025.jpg$ UH-PMDS025: PMI SMC Tie-Off Bar [SM12301] ~~$28.65~~ $27.20 On Sale! Large 1 inch diameter "hyper bar" with extension and pin to make locking off easier as well as providing additional friction when needed. Use in place of a top bar. Weight: 52. oz. (147g)
UH-CMDS013: CMI Rappel Racks, Sport Rack, No Bars [SPORTRK1W] ~~$39.65~~ $37.65 On Sale! CMI Sport Racks are formed from 3/8" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. In order to compensate for the reduced friction inherent in stainless bars, we increased the radius of the friction surface to a full 1/2". The result is a longer wearing bar with maximum control. Due to the "open back" style of the bars featured on CMI Rappel Racks, improper rigging is easier to spot which aids in accident avoidance. CMI Sport Racks are available with the eye either parallel or at 90 degrees to the bars. They feature welded eye construction; welds are Zyglo inspected to insure reliability. Versatile 6 bar configuration comes pre-rigged with angle slotted bars that snap in place. Racks and bars can be purchased seperately. Material: T-304 Stainless Steel Overall Length: 49.5cm (19 1/2in) Choices: 90 Degree Eye or Standard Eye	UH-CMDS014: CMI Rappel Racks, Rescue Rack, No Bars [RRACK] ~~$54.50~~ $51.80 On Sale! CMI Sport Racks are formed from 3/8" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. In order to compensate for the reduced friction inherent in stainless bars, we increased the radius of the friction surface to a full 1/2". The result is a longer wearing bar with maximum control. With the "open back" style of the bars featured on CMI Rappel Racks, improper rigging is easier to spot which aids in accident avoidance. CMI Rescue Racks are designed along the lines of the original "super rack." They come pre-rigged with six bars, five straight slotted stainless steel and an oversize aluminum top bar to aid in locking off. Material: T-304 Stainless Steel Weight (with bars): 760g (1lb 11oz) Overall Length: 40.6cm (16in)
UH-CMDS015: CMI Rappel Racks, Angle or Straight Slot, Stainless Steel [BRKBAR2 / 3] $3.75 CMI Rappel Racks Choices: Angle Slot Bar or Straight Slot Bar	UH-CMDS016: CMI Rappel Racks, Top Bar for RRACK [BRKBAR4] ~~$17.00~~ $16.25 On Sale! Top Bar for RRACK
UH-CMDS017: CMI Rappel Racks, Hyperbar for Sport Rack [BRKBAR7] ~~$19.00~~ $18.10 On Sale! Hyperbar for Sport Rack	UH-PMEB007: PMI Bar-Tender Brake Rack Gear Bag, 2 Left In Stock [SG51167] ~~$12.50~~ $9.95 On Sale! 2 Left In Store Stock Store your brake bar rack in this handy pouch to keep bars together and minimize the jingle factor when not is ues. The PMI Bar-Tender Fits any size rack, with or without a hyper bar. Just slide the Cordura sheath around the frame and bars on the reack, and secure the Velcro closure. Snap the quick release buckle closed and cinch tight, when needed, to secure the bars from sliding down the frames. Color: Red Only Size" 4" x 8" Weight 1.5 oz. (42g)