Harnesses: Seat Harnesses
Work, Rescue & Tactical
UH-PZHR005: Petzl
FALCON Harness, Black, Sit-Harness
[C38 1]
$125.95
Intended for work positioning, for rescuers and rescue teams, it is particularly suitable for rope descent because of the high position of the front attachment point.
Lightweight and durable work positioning sit harness.
100 % polyester for better abrasion resistance and resistance to contact with acids.
Adjustable belt and leg loops
Dorsal attachment point for attachment of shoulder straps.
Rapid adjustment by one buckle on the belt
Four equipment loops
Color: Black Only
Size 1, Small-Large or Size 2, Large-XXLarge
UH-PZHR014: Petzl
NAVAHO MINI BOSS Harness, Work Positioning Belt and Sit-Harness w/Rigid Seat
[C91 1]
$359.95
$341.99
On Sale!
For work positioning in situations of prolonged suspension.
Combination of a rigid seat and a wide semi-rigid belt for maximum comfort.
Belt and seat are adjustable to alter the angle of the seat position and adapt to different work situations.
Two lateral belt attachment points
Two lateral belt-seat attachment points to better distribute the load between the waistbelt and seat.
Eight equipment loops including two for heavier equipment
Allows use of a CROLL chest rope clamp/grab for easy rope climbing
Rear attachment ring for SECUR shoulder straps.
Can be used with TWISTER lanyard between the two lateral belt-seat attachment points
Can be converted to a fall-arrest harness
Weight: 2040g
Waist: 27.5 - 47.2 inches
Leg Loops: 19.7 - 25.6 inches
Sizes: Size 1 (Small - Large) or Size 2 (Large - XX-Large)
UH-CMHR002: CMI Harnesses,
Tactical Infinity
[HAR15T]
$59.15
$56.00
On Sale!
While "tactical infinity" may be slightly beyond the adjustment capability of this harness, we're not exaggerating by much! Solidly crafted from supple but durable 2" wide web, you'll find this is a very universal design. 2" aluminum buckle at the waist is place off to the left, away from the reinforced tie-in point; 2" buckles on the leg loops give maximum adjustability. 3/4" elastic backstays can be readily removed if desired.
The Tactical version features a stealthy olive drab tie-in point.
An ideal all-around or program harness.
Optional pads available make this harness more comfortable.
The Infinity exceeds UIAA test specs (3550#).
Weight: 482g (1lb 1 oz)
Range of Adjustability: 26 - 52" waist
PADS ALSO AVAILABLE for $20 - click add to cart to add these pads
UH-PMHR005: PMI
Avatar NFPA Seat Harness, Class II
[SG51043]
$210.00
$178.50
On Sale!
The ultimate in comfort and protection!! PMI’s AVATAR harness is the most comfortable, versatile work and rescue harness on the market today.
At only 5lb 15oz, it is lightweight and includes a functional and practical variety of attachment points for any work/rescue application: sternal, dorsal, waist, shoulder, and rear waist belt... PLUS side attachments for positioning.
Ergonomic design puts safety first without compromising comfort. Adjustable leg loops and waist belt are extra wide and padded. Includes storage/carrying bag.
NFPA 1983 Class II, ANSI Z359.1.
Choices: Standard: 31-45" Waist, 20"-34" Leg loops, 4.2 lbs. or Large/XX-Large: 37"-56" Waist, 23"-37" Leg loops, 4.4 lbs.
UH-PMHR011: PMI
DeltaTactical Seat Harness
, size choice [SG51110]
$85.00
$74.95
On Sale!
Lighter weight, maximum comfort for tactical operations, theatrical use, or any rigging or non-NFPA rescue application.
For improved tactical performance, traditional gear loops have been replaced with detachable gear loop kit that can be customized to fit your needs.
Adjustable waist and legs, comfortable padding, gear loop kit, drop seat, Steel D Ring frontal attachment point.
Weight: 24.2 oz.(687g) Standard or 26.4 oz L-XL
Color: Black ONLY
Choices: Standard - Hip 28"-44", Leg 18.5"-29" or Large-X-Large - Hip 35"-55", Leg 23.5"-35"
UH-YTHR001: Yates
Mountain Warfare
[305]
$124.00
$114.95
On Sale!
YATES Mountain Warfare Harness was designed in cooperation with the USMC Mountain Warfare Training Center.
The Mountain Warfare harness was designed for special “stealth” needs for extreme tactical situations involved in Climbing, Rappelling, SWAT and Rescue.
Waist pad is fully padded and 3 1/2” width.
Yates over-width legs give ultimate comfort without bulky leg pads.
Unique overlapping waist pad with multiple leg suspension attachments allow for total adjustability of this padded harness.
Multiple gear racking loops are provided.
All hardware and buckles are mat-finish epoxy coated to reduce reflective light for tactical operations.
Ultimate tensile strength 5000 lbs.
Color: Black
Exceeds (NFPA 1983-1990 Edition) ANSI/OSHA requirements for a CLASS II Harness.
Sizes: Regular 29-36", Large 35-45" or X-Large 42-50" Waist.
UH-YTHR002: Yates
Padded Assault with Rear D Ring
[316B]
$181.00
$169.95
On Sale!
Yates Padded Assault Seat Harness offers durability, comfort and strength.
Forged D-ring used for main attachment point has a Proof-load strength of 5000 lbs.
2 inch waist belt webbing for increased comfort during long rappels.
Waist closure uses Double-Pass Buckle System for added security.
The leg loops are quick adjustable, using Yates CAM-LOCK hardware.
All hardware and buckles are plated or epoxy coated black.
One gear rack is provided.
Yates Assault Seat Harness is well suited for all rescue, military, SWAT and tactical applications where a Class II Harness is required.
Exceeds ASTM/ANSI/OSHA requirements for a Class II Seat Harness.
Color: Black.
Removable 4" Waist Pad (S, M, L, XL) with D ring for rear attachment.
One size fully adjustable (Fits waist 25" - 50").
UH-YTHR003: Yates
NFPA Seat Non-Padded Harness
, choices [320]
$112.00
$105.95
On Sale!
NFPA Seat Harness is well suited for all fire department, rescue, military, industrial and commercial applications where a Class II harness is required. Front portion of seat harness utilizes patented slot webbing construction to form connection between leg loops and D-ring tie-in point. Slot webbing construction reduces bulk while increasing strength. Forged D-ring used for main attachment point has a proof-load strength of 5000 lbs. Waist and leg webbings are quick adjustable, using Yates CAM-LOCK hardware . Harness is sewn with contrasting color thread, offering visual inspection of all stitching. One gear rack is provided. Harness certification requirements were conducted by Underwriters Laboratories Inc. in accordance with the NFPA (National Fire Protection Association) Standard for Fire Service Life Safety Rope and System Components. (1983/1995 Edition).
See UH-YTHR038 for Padded harness
One size fully adjustable (Fits waist 26” - 50”).
Colors: Black or Orange/Black (color shown)
UH-YTHR018-01: Yates
Ladderman Turnout Harness
[326]
Available Left or Right Opening
$119.00
$113.00
On Sale!
Designed to be donned with turnout pants. Utilizes quick connect waist buckle. Harness can be easily fitted to turnout pants using the existing keeper loops supplied on many turnouts. If turnouts do not have keeper belt and leg loop straps, they must be added by the user to secure the harness.
Large D ring for multiple connections
Waist pad under buckle for added comfort
Certified to NFPA 1983/2001 ed. standards
One size, fully adjustable, 26-54" Waist
Choices: Left Hand or Right Hand Opening
UH-YTHR020: Yates,
Victim Rescue Seat Harness
[321]
$140.00
$132.95
On Sale!
Lightweight harness specially designed for victim rescue. Double locking quick connect snap hook and locking D ring adjustment system allows for fast application on victim. Waist pocket securely holds leg straps while rescuer applies belt to victim giving the rescuer a fast clip in point. Leg straps are then removed and applied. Waist and leg portions of harness are color coded using orange, blue and black webbing to assist in easy application. Leg buckles are also color coded and are quickly adjustable when on victim.
Large D ring for multiple connections
Waist pad under buckle for added comfort
Meets ANSI/OSHA Class II harness standards
One size, fully adjustable
UH-YTHR021: Yates,
SAR Seat Harness
[312]
$129.00
$121.95
On Sale!
Lightweight harness specially designed for search and rescue professionals. Unique waist pocket enables harness to be worn as a belt and quickly converted to a Class II seat harness. Utilizes a double pass waist buckle and forged two piece friction buckles on the legs. Main attachment point allows freedom of movement with reduced bulk.
Utilizes slot webbing construction
Leg buckles epoxy coated black
Will accept military Alice clips for gear and pouches
Meets ANSI/OSHA Class II harness standards
Sizes: Small, Medium, Large, X-Large or XX-Large by special order
UH-YTHR027: Yates,
Kevlar Heat Resistance Ladderman Harness
[323]
$275.00
$259.95
On Sale!
Lightweight harness specially designed for ladder use. Utilizes double locking quick connect snap hook and locking D ring adjustment system for fast application over turnout gear. Waist pocket securely holds leg straps until needed. Waist and leg portions of harness are color coded using orange, blue and black kevlar webbing to assist in easy application. Leg buckles are also color coded and are quickly adjustable.
Combine with Yates Ladder Hook Extension for the perfect solution to safety on ladders.
Large D ring for multiple connections
Waist pad under buckle for added comfort
Certified to NFPA 1983/2001 ed. standards
Manufactured from heat resistant Kevlar webbing with Nomex pouch. Ultimate in heat resistance.
One size, fully adjustable, 26-54" Waist
UH-YTHR029: Yates,
Tactical Shield Climbing Seat Harness
, Size Choice [208]
$155.00
$146.95
On Sale!
Designed for tactical situations with long hang time. Fully padded and totally adjustable. Wide 5 inch belt is super comfortable. Tapered anatomical design for flexibility and comfort. Waist belt adjusts 4 to 6 inches to accommodate for cold weather clothing or to be worn over heavy gear or vests. Camlock buckle closure system adds security and eliminates the need to double pass buckles. Racking system uses large diameter sheathed tubing for easy clipping. Wide, padded leg loops are fully adjustable with quick adjust buckles to accommodate a variety of sizing requirements. The Tactical Shield offers a new standard in tactical harness comfort and versatility.
Quick leg adjustment with camlock buckles
3500 lbf. rated haul loop
All hardware plated or epoxy coated black
Six gear racks
Four tool holders
Meets ANSI/OSHA Class II harness standards
Sizes: Small 27-31" Waist), Medium (3-34" Waist), Large (33-37" Waist), X-Large (36-40" Waist) or XX-Large (39-44" Waist)
UH-YTHR030: Yates,
Padded Lightweight Assault Seat Harness
[308 Series]
$160.00
$151.95
On Sale!
Well suited for all rescue, military, SWAT and tactical applications where a Class II harness is utilized. Similar to the standard Assault Harness with quick adjust waist buckle system for easier entry.
D ring used for main attachment point.
Weight 1 lb. 8 oz.
All hardware plated or epoxy coated in color
One gear rack
Meets ANSI/OSHA Class II harness standards
Sizing: 25 - 50" Regular
Colors: Black, Foliage Green or Terra
SIZES: Small (26-31" Waist), Medium (30-36"), Large (34-40"), or XL (38=48" Waist)
Optional D Ring -0 Add'L $10 fee
UH-YTHR031: Yates,
SWAT/Special Ops Harness
[309]
$124.00
$116.95
On Sale!
Designed in conjunction with LAPD SWAT, this new harness utilizes a fully padded structural duty belt which is designed to replace the existing padded duty belt worn by SWAT Officers. Super stiff scuba webbing is sewn to the outside of the belt to facilitate hanging of leg holsters, ammo pouches and gas mask bags. Stiff scuba webbing belt attached to inside structural webbing by velcoe for easy adjustment and positioning of holsters and pouches. Waist belt adjuster buckle is located on the left side so that it will not interfere with positioning of the right side weapon (harness is available in a model for left handed users). Leg loop portion of harness can be quickly attached to the belt with a standard locking carabiner (not included). This converts the duty belt portion of the system into a fully functional rappel harness.
Weight 1 lb. 12 oz.
Quick leg adjustment with camlock buckles
Fully structural rear attachment loop
All hardware plated or or epoxy coated black
Sizes: Medium (30-35" Waist), Large (34-39" Waist) or X-Large (42-50")
UH-YTHR032: Yates,
Rescue Seat Harness
[310]
$74.00
$70.50
On Sale!
Well suited for rescue, military, SWAT and tactical rappel applications where a metal attachment point is not necessary. Originally designed for the US Navy Seals tactical teams, the anatomical configuration of the harness has made it the choice for many tactical teams who need a non-restrictive harness system. Front attachment point is provided through slot webbing construction.
Quick leg adjustment with camlock buckles
All hardware plated or epoxy coated black
One gear rack
Meets ANSI/OSHA Class II harness standards
One size, fully adjustable, 25-50" Waist
UH-YTHR033: Yates,
Lightweight Assault Seat Harness
[313]
$99.00
$94.95
On Sale!
Well suited for all rescue, military, SWAT and tactical applications where a Class II harness is utilized. Similar to the standard Assault Harness with quick adjust waist buckle system for easier entry.
D ring used for main attachment point.
Quick leg adjustment with camlock buckles
All hardware are plated or epoxy coated black
One gear rack
Meets ANSI/OSHA Class II harness standards
One size, fully adjustable, 25-50" Waist
UH-YTHR035: Yates
Assault Seat Harness
[315]
$110.00
$104.50
On Sale!
Well suited for all rescue, military, SWAT and tactical applications where a Class II harness is utilized. 2 inch waist belt webbing for increased comfort during long rappels. Waist closure uses double-pass buckle system for added security. Forged D ring used for main attachment point. Optional, removable 5 inch waist pad with or without D ring for rear attachment is available (items 400 or 405) or purchased as 316A or 316B.
Quick leg adjustment with camlock buckles
All buckles epoxy coated black
One gear rack
Meets ANSI/OSHA Class II harness standards
One size, fully adjustable, 26-54" Waist
UH-YTHR036: Yates
Padded Assault Seat Harness
, Size Choices [316A / 316B]
$171.00
$162.95
On Sale!
Well suited for all rescue, military, SWAT and tactical applications where a Class II harness is utilized. 2 inch waist belt webbing for increased comfort during long rappels. Waist closure uses double-pass buckle system for added security.
Forged D ring used for main attachment point. [CHOICE OF D-RING: Add'L $10 fee]
Optional, removable 5 inch waist pad with or without D ring for rear attachment is available (items 400 or 405) or purchased as 316A or 316B. PADDED
Quick leg adjustment with camlock buckles
All buckles epoxy coated black
One gear rack
Meets ANSI/OSHA Class II harness standards
Sizes: Small (26-31"), Medium (30-36"), Large (34-40"), X-Large (38-48" Waist) or XX-Large
UH-YTHR037: Yates,
Tactical Rappel Seat Harness with D-Ring Attachment Point
[317]
$132.00
$125.50
On Sale!
Specially designed for tactical applications. Can be worn as a belt and turned into a rappel seat by removing the leg portions of the harness from waist pocket. Utilizes a unique double locking quick connect snap hook and locking D ring adjustment system that allows for fast application. Leg straps can be quickly packed away in waist pocket when harness is turned back into a belt.
Optional 5 inch waist pad is designed to accept military Alice clips for addition of military style gear and ammunition pouches (items 400 or 405).
D ring main attachment point allows free movement with reduced bulk.
All hardware plated or epoxy coated black
Meets ANSI/OSHA Class II harness standards
One size, fully adjustable, 26-54" Waist
UH-YTHR038: Yates
Padded NFPA Seat Harness
, choices [320A]
$169.00
$159.95
On Sale!
Designed for fire department, rescue, military, industrial and commercial applications where a Class II seat harness is required. Quickly and easily donned and adjusted by use of camlock buckles.
Large D ring for multiple connections
Slot webbing construction
Chest harness can be added to create Class III harness
Waist pads on 320A can be removed
3 inch leg pads on 320A can be removed
Optional pads can be added to 320 after purchase
One gear rack
Certified to NFPA 1983/2001 ed. standards
Meets ANSI/OSHA Class II harness standards
Colors: Black/Yellow (shown in photo) or Orange/Black
Sizes: Small 26"-31" Waist, Medium 30"-36", Large 34'-40" or X-Large 38'-40"
UH-YTHR073: Yates Tactical Rappel Belt
NEW 2007 ITEM
[304]
$145.00
$137.75
On Sale!
Designed in conjunction with military Special Ops units this harness is worn as a duty belt on users BDU’s. Stiffener webbing is sewn inside the belt area of the harness to support wearing side arm. Leg portion can be quickly donned by opening the pouch and securing the leg loop portions with quick connect aluminium COBRA buckles. Harness attachment point is well suited for all rappel and extraction situations.
Weight 1 lb. 6 oz.
Utilizes slot webbing constructions
SIZES: Medium and Large
Colors: Black, Terra or Foliage Green
UH-PZHR039: Petzl
NFPA
Work Positioning Harness [C79000 Series]
$210.00
$200.00
On Sale!
This harness replaces the VARIO with CE Certification
Work positioning sit harness
One ventral and two lateral attachment points for multiple hands-free work positioning configurations.
Lightweight elastic connection between waist belt and leg loops.
Add a chest harness to use with a fall arrest system.
Certification: CE EN358, EN813
Sizes: Size 1: Waist 70-120cm, Leg Loops 50-65cm, Weight: 1190g
Size 2: Waist 80-140cm, Leg Loops 60-75cm, Weight: 1300g
UH-PZHR043: Petzl
NFPA NAVAHO SIT FAST Harness
[C790FN / C790F0-A]
$230.00
$215.00
On Sale!
Chest harness transforms sit harness into a harness for rope access
Integrated CROLL ventral rope clamp for ascending ropes.
Single sternal attachment point
The chest harness doesn't have a dorsal attachment point, so it won't interfere when wearing a backpack or carrying other loads.
Connects to the rear buckle of a NAVAHO SIT harness.
Weight carried on the waist belt is transferred to the shoulder straps.
Certification With NAVAHO SIT harness: CE EN361, CE EN12841 type B
Sizes: Size O, Waist 23.6"-39.4", Size 1: 27.3"-46.8" ,
or Size 2: 31.2"-54.6"
Colors: Black/Yellow or ALL Black - Add'L $10 fee
UH-PMHR037: PMI
HEIGHTEC ECLIPSE Seat Harness, With or Without Positioning Rings
[SG51192 Series]
$210.00
$178.50
On Sale!
Rope access sit harness - this harness gives unparaellel comfort. Like the Zero-G riggers harness, the Eclipse has a deep reat back pad which provides a high degree of lumbar support.
Eclipse ring, Comfortable leg loop risers
Central waist attachment, Four gear loops
Color: Black
Weight: Without D-Rings 2.44 lbs. (1.1 kg)
Weight with D-Rings 2.69 lbs (1220 g)
SIZES Standard or Large-XL
CHOICES: No Side Positioning Rings or With Side Positioning Rings - Add'L $20 fee
UH-PMHR038: PMI
HEIGHTEC SHADOW Seat Harness
[SG51216]
$180.00
$124.95
On Sale!
Self Adjusting wasit and risers of the Eclipse Ring offer the comfort of its beefier cousins.
Comfortable leg loop risers
Comfortable leg loop, Two gear loops
Color: Black, One Size
Eclipse Ring: the leg and waist webbing are sewn into the Eclipse Ring giving each section the ability to move seperately. Walking, sitting and working in a harness has never been more comfortable.
UH-PMHR039: PMI
HEIGHTEC TREETOP Arborist Seat Harness
[SG51194]
$298.00
$253.30
On Sale!
It is favored by technical climbers and is used at competition level around the technical climbers and is used at competition level around the world. The low central attachment point is specially designed for arboriculture body thrust climbing by being positioned as close to the hips as possible.
Low frontal connection for easy climbing
Rear gear loops
Side D rings fold back when not required
Stainless steel chainsaw ring
Color: Black, One Size
Weight: 2.46 lbs. (1.12 kg)
UH-PMHR040: PMI
HEIGHTEC BEE Arborist Seat Harness
, adj. & replaceable front webbing assembly [SG51195]
$334.00
$283.90
On Sale!
The technical features of the TreeHopper with added durability and the ability to replace the front suspension strap in case of wear.
Adjustable and replacement front webbing assimbly
Rear gear loops, Quick release buckles
Side D rings fold back when not required
Stainless steel chainsaw ring
Color: Black, One Size
Weight: 3.24 lbs. (1.47 kg)
UH-PZHR046: Petzl SEQUOIA SRT Arborist Saddle Harness [C69AF0]
NEW IN MARCH, 2008
$345.00
$279.99
On Sale!
NEW FOR APRIL 2008!
HUGE SALE ON NEW ITEM FOR A LIMITED TIME
Suspension Bridge, 25, 30 or 35 cm and Small, Ring Non-gated also available - call to order
CHOICES: Size 1 (Standard) or Size 2 (Large/XL)
UH-PZHR046-1: Petzl SEQUOIA SRT Arborist Saddle Harness
NEW IN APRIL 2008
[C690F0]
$320.00
$300.00
On Sale!
NEW FOR APRIL 2008!
Suspension Bridge, 25, 30 or 35 cm and Small, Ring Non-gated also available - call to order
CHOICES: Size 1 (Standard) or Size 2 (Large/XL)
HOME
SHIPPING & ORDERING INFORMATION
GIFT CERTIFICATES
