Industrial Rope Access: Hardware

products\UH-PZDS001.jpg UH-PZDS001: Petzl SHUNT Descender Mechanical Prusik, Rappel Back-Up [B03]
$59.95 $56.95 On Sale!
A mechanical replacement for self-jamming knots (Prussik, Machard...). Positioned below a descender, the Shunt acts as a back-up belay for an abseil descent. It locks onto the rope as soon as you release it and follows your descent when you press on it.
  • For use on single rope (10-11 mm) or
  • For use on double (8-11 mm)
  • Weight: 188 g
  • CE, UIAA

    • products\UH-PZDS004.jpg UH-PZDS004: Petzl STOP Descender, Self-Braking for Rope [D09]
    $89.95 $84.95 On Sale!
    For long descents on single rope.
    Can be installed on the rope without disconnecting it from the harness thanks to the clip. Self braking system brakes as soon as the handle is released. Control the speed of descent by varying the grip on the free end of the rope. Rope ascending is possible without changing the position of the STOP by adding a footloop and a handled rope clamp/grab.
  • Individually tested
  • For rope diameters 10-11 mm (7/16" in max)
  • Weight: 326 g
  • Certified CE EN 341 class A

    Colors: Blue or Black - Add'L $2 fee

    		•
    products/UH-PZDS007-1.jpg UH-PZDS007: Petzl GRIGRI Belay Device/Descender, Self-Braking Device for 10-11mm Single Rope [D14]
    $89.95 $86.95 On Sale!
    For belaying of a leader or second, and for short abseils on single rope.

    Self-braking system: if a fall occurs, the pivoting cam inside the device facilitates braking.

    Simple to use:
  • control of the running of the rope using both hands to slide the rope through the device, braking by hand, fall arrest by holding the free end of the rope, release of the rope using the handle.
  • For ropes from 10-11 mm (9.7 mm accepted)
  • Weight: 225g
  • CE

    • products/UH-PZDS009-1.jpg UH-PZDS009: Petzl I'D Descender (large) Self-Braking Descender, NFPA, 1 Large Left! [D20 L]
    $210.00 $200.00 On Sale!
    SPECIAL SALE - 1 Left In Stock! For descending a rope and for belaying, with an anti-panic function.
  • Anti-error safety catch to reduce the risk of an accident due to incorrect installation of the device on the rope.
  • Anti-panic function: if the user pulls too hard on the handle, the cam will lock on the rope. Locking position on the handle for positioning while on the rope.
  • When used for hauling, allows the system to be reversible.
  • With a safety clip on the swinging side plate: reduces the risk of dropping the device, practical for quick installation of the rope, efficient means for passing intermediate anchors.
  • Weight: 530 g.
  • D20 S: for rope dia 10-11.5 mm,CE EN 341 Classe A, NFPA L
  • D20 L: for rope dia 11.5-13 mm, CE EN 341 Classe A, NFPA G.
  • Individually tested.

    CHOICES:
    Large: For rope diameters from 11.5-13 mm: #D20 L (1 Left - Red) or

  • Small ID Ascenders, Black Available as of March 2008 - [D20 S/D20 SN]

    • products/UH-YTAS002.jpg UH-YTAS002: Yates, Big Wall Hand Ascenders, Pair [1011]
    $174.00 $164.95 On Sale!
    Durable heavyweight construction specifically designed for rigging and rescue applications. These are no lightweight rock climbing ascenders! Easy to operate with gloved hand, these ascenders come with large thumb release on cam, large molded hand grip and double clip-in points. Unique cam design allows for increased strength.
  • Will accommodate 9 to 13 mm ropes.
  • Strength (frame) 6000 lbf.

    • products/UH-CMAN002-1.jpg UH-CMAN002: CMI NFPA Rigplate, Aluminum Bearpaw [RIGPLAT1NFPA]
    $57.25 $55.25 On Sale!
    CMI Rigging Plates are crafted from aircraft grade aluminum and finished in high visibility yellow. Each plate contains one 2.25" diameter anchor hole and five 0.9" diameter rigging holes. CMI's unique five-hole design allows for center loading making it useful for stretcher operations.
  • NFPA Compliant
  • Size: 6 3/4" x 5" (17cm x 12.7cm)
  • Weight: 6.7 oz (190g)
  • Breaking Strength: 7500 pounds
    Also available: Small Bearpaw Rigging Plate, Aluminum RIGPLAT1

    • products/UH-CMAN003.jpg UH-CMAN003: CMI NFPA Rigplate, SS Bearpaw [RIGPLAT2NFPA]
    $61.70 $59.70 On Sale!
    CMI Rigging Plates are crafted from aircraft grade aluminum and finished in high visibility yellow. Each plate contains one 2.25" diameter anchor hole and five 0.9" diameter rigging holes. CMI's unique five-hole design allows for center loading making it useful for stretcher operations.
  • NFPA Compliant
  • Size: 6 3/4" x 5" (17cm x 12.7cm)
  • Weight: 6.7 oz (190g)
  • Breaking Strength: 7500 pounds
  • Stainless Steel

    		•
    products\UH-PMAN005.jpg UH-PMAN005: PMI SMC NFPA Rigging Plate [SM130005N]
    $46.50 $44.25 On Sale!
    Half the size of the bigger plates on the market, yet just as strong and with oversized holes to accomodate more gear. Contoured edges are easy on ropes, webbing, and carabiners. Each oval hole will easily accept 2 large carabiners while a large center hole accepts humerous connections.
  • MBS: 11,690 lbf (52kN)
  • Weight 11.4 oz. (335g)
  • Certified NFPA 1983, G

    		•
    products/UH-PZAS007.jpg UH-PZAS008: Petzl ASCENSION Rope Grab, Left-Hand or Right-Handed, Handled Ascender for Rope, NFPA 8-13mm [B17 Series]
    $64.95
    Designed for ascending single ropes.
  • Handle with elastomer grip is comfortable and provides thermal insulation.
  • Chrome-plated steel cam has inclined teeth and self-cleaning slots to provide grip on wet, icy or muddy ropes.
  • Ergonomic spring-loaded catch allows the cam to be held in the open position and facilitates one-handed installation or removal of the device.
  • 2 lower holes for attaching a foot loop and a lanyard.
  • 2 upper holes allow a carabiner to be clipped around the rope for easier sliding up the rope when used for self-belaying, and for building pulley systems.
  • 2 colors for easy recognition: left or right
  • NFPA 1983 L-rated
  • Weight: 196g
  • Individually tested
  • For use on single rope from 8 mm to 13 mm in diameter

    Choices: Left-handed version in yellow(gold) or black - Add'L $2 fee for black
    Right-handed in blue or black - Add'L $2 fee for black

    • products\UH-PZCB003.jpg UH-PZCB003: Petzl, KADOR, Steel Carabiners, Tempered Steel, Auto-Locking [M73]
    $39.95 $37.99 On Sale!
    For use with heavy loads, connecting to cables and work station organization.
  • High quality steel gives the exceptional strength and durability required for the demanding usage conditions found in work and rescue applications.
  • Large size allows clipping of several ropes or cables.
  • Wide opening for clipping large diameter bars.
  • Pear shape for easy handling and for belaying using an Italian (Munter) hitch.
  • Strength: 40 kN long axis, 12 kN gate open, 10 kN short axis.
  • Opening: 23.5 mm gate opening width
  • Weight: 280 g
  • CE EN 362 & EN 12 275 types K/B/H
  • Individually tested

    • products/UH-PZCB004.jpg UH-PZCB004: Petzl, Steel Carabiners, Steel'O, Screw Gate Carabiner [M72]
    $10.95
    For use with heavy loads, connecting to cables and work station organization.
  • High quality steel gives the exceptional strength and durability required for the demanding usage conditions found in work and rescue applications.
  • Wide opening for clipping small diameter bars.
  • Pear shape for easy handling and for belaying using an Italian (Munter) hitch.
  • CE EN 362 & EN 12 275 types K/B/H
  • Individually tested

    • products/UH-OPCB043.gif UH-OPCB043: Omega Pacific 7/16" Steel Modified D Screw Lok Carabiner, Gold [OP76S38L]
    $18.95 $18.00 On Sale!
    One of our finest designs and most successful products, the Modified D is a great handling carabiner for general use. Heat treated and plated to increase corrosion resistance, this 'biner is a must for every rescue kit. Be sure to check out our captive-eye version which is great as a component to slings, harnesses and kits when you don't want the carabiner to become detached. Captive eye Modified D's are great for OEM projects and industrial uses (each captive-eye comes with the pin uninstalled, ready for your use).
  • Gate Opening: 24mm /.945"
  • Major Axis Strength: 53kN
  • Gate Open Strength: 14kN
  • Minor Axis Strength: 9kN
  • Weight: 210g /7.4 oz.
  • Length: 11.3mm /4.38"
  • Width: 70.4mm /2.77"

    Colors: Gold or
    Black - Add'L $1.00 fee

    • products/UH-OPCB045.gif UH-OPCB045: Omega Pacific 7/16" Steel Modified D Quik Lok Carabiner, Gold or Black [OP76S38Q]
    $24.95 $23.70 On Sale!
    One of our finest designs and most successful products, the Modified D is a great handling carabiner for general use. Heat treated and plated to increase corrosion resistance, this 'biner is a must for every rescue kit. Be sure to check out our captive-eye version which is great as a component to slings, harnesses and kits when you don't want the carabiner to become detached. Captive eye Modified D's are great for OEM projects and industrial uses (each captive-eye comes with the pin uninstalled, ready for your use).
  • Gate Opening: 24mm /.945"
  • Major Axis Strength: 53kN
  • Gate Open Strength: 14kN
  • Minor Axis Strength: 9kN
  • Weight: 220g /7.8 oz.
  • Length: 11.3mm /4.38"
  • Width: 70.4mm /2.77"

    Colors: Gold or
    Black - Add'L $2.00 fee

    • products/UH-OPCB047.gif UH-OPCB047: Omega Pacific 1/2" Steel Modified D Screw Lok Carabiner, Gold [OP12S38L]
    $18.95 $18.00 On Sale!
    Same "D" shape as our 7/16" model, but with bigger material for increased strength. Same great handling and use characteristics but with a strength rating of 65kN (that's over 14,000 lbf.!). Like all our carabiners, every ½" Modified D is individually proof-tested to half it's rated strength which means every one of these has been proven to hold over 7000 lbs!
  • Gate Opening: 24mm /.945"
  • Major Axis Strength: 53kN
  • Gate Open Strength: 14kN
  • Minor Axis Strength: 9kN
  • Weight: 210g /7.4 oz.
  • Length: 11.3mm /4.38"
  • Width: 70.4mm /2.77"

    Colors: Gold or
    Black - Add'L $1.00 fee

    • products/UH-OPCB049.gif UH-OPCB049: Omega Pacific 1/2" Steel Large D Screw Lok NFPA Carabiner, Gold or Black [OP12S58LNFPA]
    $21.95 $20.90 On Sale!
    BEST SELLER IN 2005 & 2006!

    Large D shape for great handling, huge gate opening and massive strength! At a rated strength of 72kN, it's one of the strongest carabiners in the world! Heat-treated, half-load tested (over 8000 lbf.) and built to exacting standards, the ½" Large D is one very fine steel carabiner.
  • Exceeds NFPA 1983.01 standards
  • Exceeds ANSI/OSHA strength requirements
  • Meets NFPA 1983.01 construction standards
  • UL Classification G
  • Gate Opening: 27mm /1.42"
  • Major Axis Strength: 72kN
  • Gate Open Strength: 22kN
  • Minor Axis Strength: 12kN
  • Weight: 289g /10.2 oz.
  • Length: 124.5mm/4.90"
  • Width: 70.6mm /2.78"

    Colors: Gold or
    Black - Add'L $1.25 fee

    		•
    products/UH-OPCB050.gif UH-OPCB050: Omega Pacific 1/2" Steel Mod D Screw-Lok Carabiner, Gold/Gold [OP12S78LNFPA]
    $27.25 $25.90 On Sale!
    Same "D" shape as our 7/16" model, but with bigger material for increased strength. Same great handling and use characteristics but with a strength rating of 65kN (that's over 14,000 lbf.!). Like all our carabiners, every ½" Modified D is individually proof-tested to half it's rated strength which means every one of these has been proven to hold over 7000 lbs!
  • Gate Opening: 38mm /1.50, Major Axis Strength: 56kN
  • Gate Open Strength: 21kN, Minor Axis Strength: 11kN
  • Weight: 363g /12.8 oz., Length: 152.4mm/6.00"
  • Width: 92.7mm /3.65"

    		•
    products\UH-PMCB021.jpg UH-PMCB021: PMI Screw Link, Square 10mm, Galvanized Steel Carabiner [HD26060]
    $9.90
    Screw links stand up to multi-directional forces better than carabiners and allow ample room for multiple pieces of gear to be attached. Ideal for harness attachment in ascending systems or for joining anchor straps.

    NOTE: Links are stamped with a Working Load Limit that is about 1/5 of its rated breaking strength. The user should decide if this is an acceptable ratio for the intended load. Made in France.
  • Weight: 5.8 oz. (164g)
  • Breaking Load Limit: 9920 lbs. (44.09 kN)
  • Working Load Limit: 1100 lbs. (4.89 kN)
  • Gate Opening: .500" (12.70mm)

    • products\UH-PZCN003.jpg UH-PZCN003: Petzl, Quick Links DELTA, Maillon Rapide Steel Triangular, 10mm [P11]
    Now Available: NEW in April 2008 - With Captive Eye
    $9.95
    Triangular quick link in steel
  • Strength: 25 kN long axis, 10 kN short axis.
  • Diameter 10 mm
  • Weight: 150 g
  • MBS: @44kN
  • Certified CE EN 12275 type Q

    NEW FOR APRIL 2008 - Delta Link with Plastic Captive Eye

    • products\UH-PZCN004.jpg UH-PZCN004: Petzl, Quick Links, GO Maillon Rapide Steel Oval, 7mm [P15]
    $5.95
    Oval quick link in steel
  • Strength: 25 kN long axis, 10 kN short axis.
  • Weight: 60 g
  • MBS: @24kN
  • Certified CE EN 12275 type Q.

    • Contact Urban HART Email Urban HART
    HOME SHIPPING & ORDERING INFORMATION GIFT CERTIFICATES