Industrial Rope Access: Straps/Lanyards/Slings/Absorbers
UH-PZLS015: Petzl, ABSORBICA-Y Energy Absorber w/Double Lanyard, 80cm or 150cm [L59 / L70150Y]
$59.95
Designed for protection on a rope or cable lifeline, or on a metal rail, and to allow passing of intermediate anchors. 80 cm length gives optimal freedom of movement and the ability to reach the connector at the end of the lanyard. The 2 arms allow the user to remain connected to the safety system when passing intermediate anchor points. Ends fitted with a STRING to help keep the connector in the correct position and to protect against abrasion.
ACT@2.5kN, MAF@6kN, MBS@15kN
80cm Length of each arm: 56 cm
80cm Length after tearing: 150 cm
80cm Weight: 210 g
CE EN 355
Choices: 80cm or 150cm [NEW](Add'L $20 fee)
UH-PZLS016: Petzl,
ABSORBICA-Y MGO Energy Absorber w/Double Lanyard and Two MGO Connectors
, 80cm or 150cm [L59 MGO Series]
$179.95
$169.95
On Sale!
Designed for movement on high construction sites or metal structures, allowing movement while remaining connected. Easy movement on large metallic structures: [80cm} 160 cm total length of the two arms, very large, automatically locking MGO connector. Captive eye design of the MGO connector helps prevent dropping or cross-loading the connector.
ACT@2.5kN, MAF@6kN, MBS@15kN, CE EN 355 & EN 362
Requires clearance height of 4.35 meters.
80cm Length: 104cm, 80cm Length of each arm: 80cm
80cm Length after tearing: 174cm, 80cm Weight: 1120g
CHOICES: 80cm or 150cm (NEW)Add'L $20 fee
UH-YTNS001: Yates 2 to 1 Heavy Duty Pick Off / Transfer Strap [440]
$33.00
$31.35
On Sale!
Used for patient pick-off situations. Configuration of Pick-off Strap allows 2:1 mechanical advantage for easier handling of patient.
Strength 5,000 lb. Min. (Buckle slippage 6,000 lbs. Min.) Made using 1 3/4” 9,000 lb. Heavy Duty Resin treated webbing for better protection from abrasion and wear. 5,000 lb. Forged D-Ring and adjuster buckles.
UH-YTNS003: Yates
Adjustable Anchor Strap
[442]
$41.00
$38.95
On Sale!
Yates Adjustable Anchor Strap offers Super high strength before buckle slippage.
Unique oversize D-ring on one end allows sprap to be choked around anchor.
Made using 1 3/4” 9,000 lb. Heavy Duty Resin treated webbing for better protection from abrasion and wear.
5,000 lb. rated forged D-rings and adjuster buckles.
Strength 5,000 lb. min. rated strength. (Buckle slippage 6,000 lbs. Min.).
Tests show D-Ring failure is consistanlty above 6000 lbs.
COLORS: Black or Yellow
UH-YTNS004: Yates
Heavy Duty Anchor Sling
without pads
[840 Series]
$37.00
HEAVY LIFTING SLINGS (Photo shown with pads)
Strength 8,000 lbf. 2” Heavy Webbing
Large 10,000 lbf. “D” Ring at Each End
With 3” Nylon Wear Pad - Strength 10,000 lbf, 2" Heavy Webbing
We also sell Super Heavy Duty Anchor Sling: 16,000 lbf - call for details [845 Series}
SIZES: 4 ft, 6 ft - (Add'L $1 fee), 8 ft - (Add'L $2 fee) or 10 ft (Add'L $3 fee)
Colors: Orange or Black
UH-YTNS016: Yates, Industrial Shock Absorbers, Loop Ends [801]
$27.00
Utilizes a highly efficient tear-stitch webbing to absorb energy by means of controlled destruction. Two layers of webbing are woven together in a prescribed manner The 801 is very useful as a shock absorber in belay, mechanical advantage, hauling and highline systems.
• Strength 5000 lbf.
• Initial length 9 inches
• Extended length 51 inches
• Certified to meet ANSI Z359.1-1992 standards
Loop Ends
UH-YTNS017: Yates, Industrial Shock Absorbers, Snap Hook [803]
$42.00
$39.90
On Sale!
Utilizes a highly efficient tear-stitch webbing to absorb energy by means of controlled destruction. Two layers of webbing are woven together in a prescribed manner The 801 is very useful as a shock absorber in belay, mechanical advantage, hauling and highline systems.
• Strength 5000 lbf.
• Initial length 9 inches
• Extended length 51 inches
• Certified to meet ANSI Z359.1-1992 standards
Snap Hooks
UH-YTNS018: Yates, Industrial Shock Absorbers, D Ring and Snap Hook [804]
$49.00
$46.55
On Sale!
Utilizes a highly efficient tear-stitch webbing to absorb energy by means of controlled destruction. Two layers of webbing are woven together in a prescribed manner The 801 is very useful as a shock absorber in belay, mechanical advantage, hauling and highline systems.
• Strength 5000 lbf.
• Initial length 9 inches
• Extended length 51 inches
• Certified to meet ANSI Z359.1-1992 standards
D Ring and Snap Hook
UH-PMNS001: PMI Easy Pick Off Strap [SG51180]
$37.00
$35.50
On Sale!
This high performance pick off strap is designed to weight less and be less bulky, but still perform when you need it. With a sewn anchor loop on the load end and a hand loop on the haul end, this strap will allow you to quickly transfer weight from one system to another. This pick off strap features Hook and Loop Strap to hold the tail neat and compact until ready to use. Buckle slips at around 2,100 lbf (9.4kN). Made in USA.
Weight: 8 oz (227g)
Length: Adjustable from 7" to 42"
UH-PMNS002: PMI General Use Pick Off Strap, 8" to 50" [SG51032]
$37.00
$35.50
On Sale!
A pick-off strap for a fast connection to a patient, your partner, or a secure anchorage. Once connected, slack can be removed simply by pulling on the free end of the strap.
Features Hook and Loop Strap to hold the tail neat and compact until ready to use.
Buckles slip at 4500lbf
MBS: 20kN
Weight: 11 oz. (323g)
Length: 8" to 50"
Made in USA.
UH-YTNS008: Yates
Heavy Duty Anchor Sling with Wear Pad
[860 Series]
$47.00
HEAVY LIFTING SLINGS
Strength 8,000 lbf. 2” Heavy Webbing
Large 10,000 lbf. “D” Ring at Each End
With 3” Nylon Wear Pad - Strength 10,000 lbf, 2" Heavy Webbing
We also sell Super Heavy Duty Anchor Sling: 16,000 lbf - call for details [850 Series]
SIZES: 4 ft, 6 ft (Add'L $6 fee), 8 ft. (Add'L $13 fee), or 10 ft. (Add'L $20 fee)
UH-PZLS005: Petzl, JANE MGO Lanyard w/MGO attached, choices [L53 __ Series]
$85.95
$82.95
On Sale!
Mainly intended for back-up systems on metal structures.
Large, auto locking connector; attaches easily to metallic structures: permanently attached to lanyard to help prevent loss, captive eye helps maintain correct orientation.
Sewn ends with plastic sleeve: protects against abrasion.
CE EN 354 & EN 362
Lengths: 60 cm (24"), 100cm (39")-(Add'L $4 fee) or
150 cm - Add'L $14 fee
UH-PZLS028: Petzl, SCORPIO EASHOOK Lanyard [L60 H]
NEW APRIL 2008
$119.95
$108.95
On Sale!
Y-shaped lanyard with tear-apart energy absorber and EASHOOK carabiners
Very simple to use, absorbs the energy of a fall by the tearing apart of certain sewn threads.
Absorber is stored in a zippered pouch:
protected from abrasion,
condition can be easily inspected (practical for rental programs).
Retractable lanyard arms are practical to use: reduced bulk,
carabiners are easily reached.
Carabiners are simple and quick to clip for increased safety.
Third, shorter arm attached to absorber for clipping to the bars (for resting) or for progressing closer to the cable.
Webbing loop allows direct attachment to harness with a girth hitch.
Certification, CE-UIAA
Weight: 540 g
UH-PZLS029: Petzl, SCORPIO VERTIGO W.LOCK Lanyard [L60 WL]
NEW APRIL 2008
$99.95
$90.95
On Sale!
Y-shaped lanyard with tear-apart energy absorber and VERTIGO carabiners
Very simple to use, absorbs the energy of a fall by the tearing apart of certain sewn threads.
Absorber is stored in a zippered pouch: protected from abrasion,
condition can be easily inspected (practical for rental programs).
Retractable lanyard arms are practical to use: reduced bulk,
carabiners are easily reached.
Carabiners are simple and quick to clip for increased safety.
Third, shorter arm attached to absorber for clipping to the bars (for resting) or for progressing closer to the cable.
Webbing loop allows direct attachment to harness with a girth hitch.
Certification, CE - UIAA
Weight: 565 g
UH-PZLS030: Petzl, ZYPER VERTIGO WIRELOCK Lanyard [L56 WL]
NEW APRIL 2008
$99.95
$90.95
On Sale!
Y-shaped lanyard with friction energy absorber and VERTIGO carabiners
Absorbs the energy of the fall by slippage of the rope through the device (friction energy absorption system).
Special very high strength stitching for the join between the rope and the two strands of the Y-shaped lanyard: no bulky knot.
Carabiners are simple and quick to clip for increased safety.
Braking rope is neatly stored on the equipment loop of the harness.
Webbing loop allows direct linking to the harness using a lark's foot knot.
Certification, CE UIAA
Weight: 660g
UH-PZNS001: Petzl GRILLON adjustable lanyard, adjustable work positioning lanyard, choices [L52 Series]
$150.00
$139.99
On Sale!
MBS: 5kN
Choices: 2 meters - 6' 7",
3 meters - 9' 10" - Add'L $10 fee
5 meters - 16' 5" - Add'L $20 fee
UH-PZNS004: Petzl GRILLON 10 or 20 Adjustable Lanyard, Temporary Horizontal Lifeline, 15kN [L52 010]
$190.00
$179.95
On Sale!
For restraint and work positioning: designed to connec to metal structures of large size, as well as to cables and large diameter bars, and to allow hands free working.
Auto locking MGO connector permanently positioned on one of the terminations of the lanyard. Ergonomic unlocking handle.
CE certified, EN 358, EN 362.
CHOICES: 10 meter or 20 meter (Add'L $50 fee)
UH-PZNS007: Petzl GRILLON HOOK
Replacement
Lanyard, choices [L522__ ]
$63.95
Petzl GRILLON HOOK replacement lanyard
Choices: 2 meters - 6 ft. 7",
3 meters - 9 ft. 10", - (Add'L $11 fee) or
5 meters - 16' 5" - (Add'L $21)
UH-PZNS010: Petzl GRILLON MGO Lanyard 3 meters with MGO attachment [L52 3MG]
$220.00
$199.99
On Sale!
Petzl GRILLON MGO lanyard 3 meters, 9ft. 10" with MGO attachment.
HOME
SHIPPING & ORDERING INFORMATION
GIFT CERTIFICATES
