Protective Gear: Protective Caps and Hats
from MSA The Safety Equipment

We also sell:
Lights (Pelican Shown)& Holders,
Hearing Protection,
Sun Shields, Protective Pouch
Terri-Band Sweatbands
Goggles & Goggle Retainers,
Chinstraps,
Face Shields,
Welding Shields & Access.
Eyewear Cleaning Accessories
Visors, etc.

Scroll Down to Find the Protective Eyewear Page

UH-MSHT001: Topgard Lightweight Protective Cap or Hat, choices [45472_ Series]
~~$18.59~~ $17.69 On Sale!
SEI Certified and meets or exceeds the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1 2003, Class E (electrical-high voltage) and G (electrical-low voltage).

Applications: Agriculture, Chemical, Construction Electric Utility, Mining, Nuclear, Oil and Gas, Paper & Pulp, Sanding & Grinding, Welding

Hazards: Electrical Shock, Overhead Falling Objects

Lightweight, durable Topgard slotted caps and non-slotted hats are built for use by utilities and other industries where head protection from falling objects is necessary along with good dielectric properties (non-conduction of electrical current). Limited resistance to top impact or penetration is retained through a wide range of temperatures. Not designed to protect against lateral blows from the front, side or rear. MSA's Vanguard Type II protective helmets must be used if lateral protection is desired. For more information, contact your local MSA distributor.

Colors: White, Yellow, Gray, Blue, Orange, Green, Red or Bright Orange

Choices: Slotted Cap or Non-Slotted Hat

*** NOTE: Some colors not available in all styles and choices
Replacement suspensions available
Hearing Protection Available - Sound Control in Cap models

UH-MSHT002: Thermalgard Protective Caps, choices [48696_ Series/4869_ Series
~~$23.85~~ $22.80 On Sale!
SEI Certified and meets or exceeds the applicable requirements for a Type 1 helmet (top impact) as outlined in ANSI Z89.1 2003, Class G (electrical-low voltage).

Applications: Agriculture, Asbestos Abatement, Chemical, Construction, Electric Utility, Elevated Temperature, Hazardous Materials, Mining, Nuclear, Oil & Gas, Paper & Pulp, Sand Blasting, Sanding & Grinding Water/Wastewater, Welding

Hazards: Confined Space, Electrical Shock, Medical, Nuisance Odor, Overhead Falling Objects Splash, Welding

Lightweight, high-strength, smooth crown helmets intended for use where workers may need a helmet with elevated temperature capability. The injection-molded, rivetless shell of glass-reinforced nylon has a beaded edge for improved rigidity. Slots in the cap allow for mounting hearing protection muffs, welding shields and faceshields. Not designed to protect against lateral blows from the front, side or rear. MSA's Vanguard Type II protective helmets are so designed and must be used if lateral protection is desired. For more information, contact your local MSA distributor.

Colors: Yellow, White, Red, Orange, Blue, Gray (Gray is not available in 1-touch), Bright Orange or Green

Choices: 1-touch or Fas-Tac

UH-MSHT003: Skullgard Protective Cap & Hats, choices[4546__ Series]
~~$65.99~~ $62.70 On Sale!
SEI Certified and meets or exceeds the applicable requirements for a Type 1 helmet (top impact) as outlined in ANSI Z89.1 2003, Class G (electrical-low voltage).

Applications: Agriculture, Asbestos Abatement, Chemical, Construction, Electric Utility, Hazardous Materials, Mining, Nuclear, Oil & Gas, Paper & Pulp, Sand Blasting, Sanding & Grinding, Water/Wastewater, Welding

Hazards: Elevated Temperature, Overhead Falling Objects, Splash, Welding

Features heavy-duty construction for use as head protection in steel mills and other heavy industries where elevated temperatures are common.

Colors: Natural Tan, White, Yellow, Red, Gray, Blue, Green or Orange
Other Choices: Hat or Cap Style (As shown in photo)
Other Choices: Staz-On or Fas-Trac

*** NOTE: Some colors not avaiable in all styles and choices
Replacement suspensions available
Alternative Skullgard assemblies
Larger Cap in Natural Tan color only [82018]
Lamp Bracket and Cord holder on Natural Tan Staz-On only in Hat or Cap choice [460389 / 460389]
Welders Lungs in Natural Tan Cap with Fas-Trac [482002]

UH-MSHT004: Topgard, Fas-Trac Suspension NEW HTE Protective Caps, choices [10074904 Series]
~~$33.55~~ $31.90 On Sale!
SEI Certified and meets or exceeds the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1 2003, Class E (electrical-high voltage) and G (electrical-low voltage).

Lightweight, durable Topgard slotted caps and non-slotted hats are built for use by utilities and other industries where head protection from falling objects is necessary along with good dielectric properties (non-conduction of electrical current). Limited resistance to top impact or penetration is retained through a wide range of temperatures. Not designed to protect against lateral blows from the front, side or rear. MSA's Vanguard Type II protective helmets must be used if lateral protection is desired. For more information, contact your local MSA distributor.

Also available for separate purchase: Replacement suspension, Arc Shield Visor, Defender & Faceshield Frames for Slotted Caps

Applications: Agriculture, Chemical, Construction Electric Utility, Mining, Nuclear, Oil and Gas, Paper & Pulp, Sanding & Grinding, Welding

Hazards: Electrical Shock, Overhead Falling Objects

Colors: White, Yellow, Red, Blue or Grey

UH-MSHT005: Comfo-Cap Headware, choices [91522 Series]
~~$42.89~~ $39.99 On Sale!
Meets or exceeds the applicable requirements for a Type I helmet (top impact) outlined in ANSI Z89.1 2003, Class G (electrical-low voltage).

Used in the mining industry for head protection and featuring a low-crown clearance for work in low-ceiling areas and a lamp bracket and cord holder to support a miner's lamp.

Made of lightweight, tough polycarbonate plastic, the shell resists top impacts. Molded cross ridges on the crown provide increased strength and rigidity. The cap's peak helps protect the wearer's eyes and face from small falling objects. The Comfo-Cap is not designed to protect against lateral blows from the front, side or rear. If lateral protection is desired, see MSA's lateral protective helmets.

Resplacement suspensions available

Applicattions: Chemical, Construction, Electric, Utility, Hazardous Materials, Mining, Water/Wastewater

Hazards: Overhead Falling Objects, Particulate & Dust, Splash, Mining

Colors: White, Blue, Yellow, Orange, Red, Green or Black
Suspensions: Staz-On (In all colors) or Fas-Trac (White color only)Add'L $7.50 fee

UH-MSHT006: Vanguard II Helmets for Lateral Protection and Emergency Response, choices
~~$41.35~~ $39.30 On Sale!
Meets or exceeds the applicable requirements of ANSI Z.89.1-2003 for Type I and Type II helmets Class E (electrical-high voltage) and G (electrical-low voltage) and is certified to CAN/CSA Z 94.1-2005, Class E, Canadian lateral protective helmet standard.

Provides limited impact and penetration protection in the event of a top or lateral blow to the head, as well as limited protection against contact with high-voltage conductors. Representing the latest generation of protective headwear, Vanguard helmets are tested to the same energy level for both top and lateral blows. Comfortable and lightweight, the helmet weighs only 19 ounces and has an optional two- or three-point chinstrap with quick-release buckle. Provides top, front, rear and side impact and penetration protection. Fas-Trac® ratchet suspension for quick, easy adjustability. Available in five colors, including white, yellow, red, blue and HiViz orange. Offers a full range of accessories including faceshields, hearing protection, lights and light holders that snap into the helmet slot, a goggle retainer and a lamp bracket and cord holder. Features easy-to-customize logos, reflective stripes and decals. For crescent or special imprinting, contact Logo Express.

Replacement suspensions and chin straps available

Defender & Foldback Faceshiled Frame (Plastic) and Visors sold seperately

Custom imprinting and striping available

Applications: Agriculture, Asbestos Abatement, Chemical, Construction, Electric Utility, Hazardous, Materials, Mining, Nuclear, Oil & Gas, Paper & Pulp, Sand Blasting, Sanding & Grinding, Water/Wastewater, Welding

Hazards: Confined Space, Electrical Shock Medical, Overhead Falling Objects, Side Impact, Splash, Welding

Colors: Yellow, White, Red, Blue or Hi-Viz Orange
Suspension: Fas-Trac Only

UH-MSHT007: Canadian Super-V Helmets for Lateral Protection, choices [C217092] BLUE IN STOCK
~~$27.15~~ $25.75 On Sale!
The MSA Super V cap is for sale in the U.S. and Canada.
The Super-V Helmet is certified to the CAN/CSA Z 94.1-1992 standard, Class E and meets all applicable requirements of ANSI Z 89.1-2003 for a Type I helmet (Class E).

The MSA Super V cap consists of a shell, foam liner, and suspension system working together to provide limited impact and penetration protection in the event of a top or lateral blow to the head, as well as limited protection against contact with high-voltage conductors. Represents the latest generation of protective headwear and tested for both top and lateral blows. Flame retardant polystyrene foam liner and nylon sideshield absorb lateral impacts. The durable, lightweight polyethylene shell weighs less than one pound. Fits head size ranges 6-1/2 to 7-5/8 inches. Available in choice of Fas-Trac® (ratchet) or 1-Touch suspension. Offers your custom-imprinted logo in up to four separate colors. Add-on accessories are available, such as faceshield frames, visors, chinstraps, ear cups, helmet lights, etc.

Replacement suspensions available

Faceshield Frams, Visors and Ear Muff Accessories sold seperately

WARNING: Super V Helmets provide limited top and lateral impact and penetration protection. They are designed to reduce the effect of an impact or penetration blow, but cannot provide complete head protection. They are designed and tested to comply with the CSA standard and, in most circumstances, should be effective against small tools, bolts, rivets, sparks and similar hazards. However, some conditions can exceed the helmet’s capacity to protect against serious injury or death. Not for use in areas where the chance of severe helmet impact or penetration exists.

For the Super V helmet to function effectively, only MSA’s Fas-Trac or 1-Touch suspension designed for this helmet must be used. Use of other suspensions can reduce the protection provided and result in serious personal injury or death. Velcro (a trademark of Velcro, USA) strips, labels, etc. should never be applied closer than ½ inch from the brim in order to maintain dielectric properties. Do not paint Super V Helmets as paint may jeopardize helmet properties. Never use this helmet as a vehicular, sports or structural firefighting helmet.

Colors: White, Yellow, Blue, Orange, Red, Green, Navy Gray, Gold, Black, Silver, Hi-Viz Orange
Fas-Trac Suspension Only and Foam Liner

UH-MSHT010: V-Guard NFL SPORTS Logo Helmets, One Touch Suspension
Newly Added 2008
~~$27.99~~ $25.99 On Sale!
See UH-MSPG004 For Matching Sport Logo Protective Eyewear
Wear then at work, at home, or even at the game. He NFL line of V-Guard Caps with the comfortable strap-adjustable, 1-touch suspension offers superior quality, comfort, and protection. NFL V-Guard Caps meet or exceed all applicable requirements for 1 type 1 helmet as outlined in ASI Z89.1-2003 (Class E) and CSA Z94.1-2005 (Class E). Safety directors will appreciate how NFL V-Guard Caps complement a safety program and improve wearer acceptance.

Applications: Agriculture, Chemical, Construction, Electric Utility, Hazardous Materials, Nuclear, Oil and Gas, Paper & Pulp

Hazards, Confined Space, Electrical Shock, Overhead Falling Objects, Splash

CHOICES: Arizona Cardinals, Atlanta Falcons, Baltimore Ravens, Buffalo Bills, Carolina Panthers, Chicago Bears, Cincinatti Bengals, Cleveland Browns, Dallas Cowboys, Denver Broncos, Detroit Lions, Green Bay Packers, Houston Texans, Indianaplis Colts, Jacksonville Jaguars, Kansas City Chiefs, Miami Dolphins, Minnesota Vikings, New England Patriots, New Orleans Saints, New York Giants, New York Jets, Oakland Raiders, Philadelphia Eagles, Pittsburgh Steelers, San Diego Chargers, San Francisco 49ers, Seattle Seahawks, St. Louis Rams, Tampa Bay Buccaneers, Tennessee Titans or Washington Redskins

Goggles - NEW
Protective Eyewear

WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.

HOME

SHIPPING & ORDERING INFORMATION

GIFT CERTIFICATES

Protective Gear: Protective Caps and Hats from MSA The Safety Equipment

Protective Gear: Protective Caps and Hats
from MSA The Safety Equipment