Pulleys: Petzl Pulleys
Also See Prusik Minding Pulleys Page
UH-PZPY001: Petzl
FIXE Pulley
, Fixed Side Plates [P05]
$24.95
$23.95
On Sale!
A very strong, lightweight and compact pulley, suitable for hauling systems and for deviating a load. May be combined with a mechanical rope clamp / grab.
High efficiency due to the sheave mounted on self-lubricating bushings.
Breaking load : 11 kN x 2 = 22 kN.
Working load : 2.5 kN x 2 = 5 kN.
For use with ropes of 13 mm maximum diameter (1/2")
19mm (3/4") sheave
Weight: 90 g
Individually tested.
CE - UIAA
EN 12278
UH-PZPY002: Petzl
TANDEM Pulley
,
Double Inline for Rope
[P21]
$54.95
Designed for use on rope tyroleans; can also be used for double pulley systems using rope.
Sheaves mounted on self-lubricating bushings, good efficiency.
May be used at speeds of up to 10 m/s.
Breaking load: 24 kN.
Working load: 10 kN.
Use with ropes of max dia 13mm (1/2")
19mm (3/4") sheave
Weight: 195 g
CE - UIAA, Individually tested
Color: Red
UH-PZPY003: Petzl
TANDEM CABLE Pulley
,
Double Inline for CABLE
[P21 CAB]
$64.95
Version of the Tandem with stainless steel sheaves. Designed for use on tyroleans, on cable or rope.
Stainless steel sheaves for use with less wear on cable or rope.
May be used at speeds of up to 10 m/s.
Breaking load: 2 x 11 kN x 2. = 24 kN.
Working load: 2 x 3 kN x 2. = 10 kN.
For use on cable (12mm max dia) & on rope (13mm max dia 1/2")
19mm (3/4") sheave
Weight: 258 g, Individually tested
CE - UIAA, CE EN 12
Color: Gold
UH-PZPY004: Petzl
TANDEM SPEED Pulley
,
Double Inline for ROPE or CABLE
[P21 SPE]
$74.95
$71.25
On Sale!
Intended for use on rope or cable, this double pulley rides on ball bearings, providing easy travel even on
Tyrolean traverses with very slight gradients.
Maximum recommended speed: 20 meters per second
For use on ropes 13 mm diameter or less
For use on cables 12 mm diameter or less
19mm (3/4") sheave
Weight: 270 g
CE - UIAA
Color: Gray
UH-PZPY005: Petzl
TRAC Pulley w/Integral VERTIGO WIRELOCK Carabiner, Double Inline Ball Bearing for
ROPE or CABLE
, [P24 1]
$99.95
$94.95
On Sale!
Double pulley for cable or rope tyroleans with integral VERTIGO carabiner.
For public use in forest adventure parks.
Easily installed with one hand; minimizing the chance of an installation error.
Sheaves are aligned to guarantee stability in motion and to reduce friction.
Sealed ball bearings for speed and to give constant efficiency independent of the weight of the person, the temperature or the humidity.
Keylock system (snag-free body/gate interface).
Wide opening to accept large diameter cables
Carabiner unlocks with a single finger, by a simple downward movement.
Breaking load: 20 kN.
Working load: 2 kN.
Max diameter(rope=13mm, cable=12mm)
19mm (3/4" sheaves)
CE - UIAA
UH-PZPY006: Petzl
RESCUE Pulley
, Sealed Ball Bearing, pivoting side plates [P50]
$45.95
Giving very high efficiency, this pulley is designed for rescue, or hauling of heavy loads.
Large sheave mounted on sealed ball bearings: excellent efficiency.
Specifically designed for heavy loads and intensive use.
Triangular attachment point can accept up to three carabiners, facilitating maneuvers and installation.
Breaking load 16 kN x 2 = 32 kN.
Working load 4 kN x 2 = 8 kN.
For ropes of 13 mm maximum diameter (1/2")
38mm (1 1/2") sheave)
Weight: 186 g
Individually tested
CE - UIAA
CE EN 12278
Colors: Also available in Black - Add'L $2 fee
UH-PZPY008: Petzl
KOOTENAY Pulley, Knot-Passing Pulley
[P67]
$159.95
$149.95
On Sale!
Designed for passing knots in rope.
Very large sheave mounted on sealed ball bearings for exceptional efficiency.
Large space between the top of the side piece and the sheave to allow passage of knots in the hauling rope.
Locking pins for the sheave allow use of the pulley as an anchor.
For ropes from 8 to 19 mm in diameter
Convertible to an Anchor, 76mm (3") Sheave
Breaking load: 20 kN x 2 = 40 kN
Working load: 5 kN x 2 = 10 kN
Height: 260 mm, Weight: 1390 g
Individually tested, CE EN 12278
UH-PZPY018: Petzl
OSCILLANTE Swing Sided SPORT Pulley
[P02]
$13.95
Swing-side pulley for emergency use
Designed for occasional use (pulley systems or hauling).
Swinging side plates for quick and easy installation.
Nylon sheave and aluminum side plates give a high strength to weight ratio.
Non-corroding pulley.
Certification: CE EN 12 278
Breaking strength: 8 kN x 2 = 16 kN.
Working load: 2 kN x 2 = 4 kN.
For use on rope of maximum diameter 13 mm.
Weight: 55 g
Individually tested
UH-PZPY019: Petzl
ROLLCAB Patient Evacuation Rescue Pulley
[P47]
$299.95
$284.95
On Sale!
Rescue roller for cable
Designed for progression & evacuation along ski lift cables.
Large opening & sheave for use on cables up to 55 mm in diameter.
When progressing, use a back-up lanyard.
55 mm cable.
Working load: 5 kN.
Height: 470 mm.
Weight: 1470 g.
UH-PZPY014-01: Petzl
Twin, Double Prusik Minding Pulley with Becket
[P65]
$99.95
$94.95
On Sale!
Designed for pulley systems and hauling of heavy loads.
Suitable for use with a Prusik hitch as a progress capture device.
Two large diameter sheaves mounted in parallel on sealed ball bearings for high efficiency.
Auxiliary attachment point can be used to build different types of pulley systems.
Can accept up to 3 carabiners.
Breaking strength: 2 x 11 kN x 2. = 44 kN.
Working load: 2 x 3 kN x 2 = 12 kN.
For ropes of maximum diameter 13 mm.
Weight: 580g
Individually tested
Colors: Red/Gold (as shown in photo) or Black - Add'L $2 fee
UH-PZPY016: Petzl
Pro Traxion Self Jamming Pulley
[P51]
$115.00
For effective and comfortable hauling of heavy loads. Very effective as a progress capture device for travel along a Tyrolean traverse.
Large diameter (38 mm) sheave mounted on sealed ball bearings for high efficiency.
Moving sideplate allows the rope to be installed when the device is attached to the anchor.
Chrome-plated steel cam has inclined teeth and self-cleaning slots to provide grip on wet, icy or muddy ropes.
Auxiliary attachment point can be used to build different types of pulley systems.
Breaking strength/used as pulley only: 11 kN x 2 =22 kN.
Working load/used as pulley only: 3 kN x 2 = 6 kN.
Breaking strength/used as selfjamming pulley: 4 kN.
Working load/used as self-jamming pulley: 2.5 kN.
For ropes from 8 to 13 mm in diameter. 265 g
Individually tested
CE EN 567 & EN 12 278
UH-PZPY017: Petzl
Mini Traxion, Pulley/Rope Grab
[P07]
$79.95
$76.00
On Sale!
A multipurpose 3-in-1 device (pulley, self-jamming pulley, rope clamp/grab) for hauling a sack, raising a person, setting up a hauling system or selfbelaying.
Sheave with self-lubricating bushings is efficient and compact.
Chrome-plated steel cam has inclined teeth and self-cleaning slots to provide grip on wet, icy or muddy ropes.
Efficiently replaces the traditional pulley system set-up: pulley + carabiner + rope clamp / grab.
Works well for Tyrolean traverses & for ascending rope...
Will find a place in all work or rescue kits.
Breaking strength/used as pulley only: 10 kN x 2 = 20 kN.
Working load/used as pulley only: 2.5 kN x 2 = 5 kN.
Breaking strength/used as sel-jamming pulley: 4 kN.
Working load/used as self-jamming pulley: 2.5 kN.
For ropes from 8 to 13 mm in diameter.
Weight: 164g
Individually tested
CE EN 567 & EN 12 278
HOME
SHIPPING & ORDERING INFORMATION
GIFT CERTIFICATES