Webbing & Nylon Straps: Rescue & Industrial
Lanyards & Straps

products\UH-PZLS002.jpg UH-PZLS001: Petzl, JANE Lanyard, Black, Single Lanyard, Dynamic Rope, Sewn Ends [L50 __ Series]
$25.95 $24.75 On Sale!
For work positioning and backup systems.
  • Used alone for work positioning, or combined with an energy absorber for integration into a fall arrest system.
  • Allows anchoring to a fixed point or a horizontal lifeline (the height of the attachment point on the harness must never be above the anchor point).
  • Sewn ends with plastic sleeve: helps hold the connector in the correct position and protects against abrasion.
  • Weight: 108g for 60cm, 225g for 200cm
  • CE EN 354

    Lengths: 60 cm (no fee), 100cm - Add'L $2 fee,
    150cm - Add'L $4 fee or 200cm - Add'L $8 fee

  • products\UH-PZLS009.jpg UH-PZLS009: Petzl, SPELEGYCA Lanyard, Sewn Webbing Double Lanyard, Cow's Tail [C44]
    $27.95 $26.60 On Sale!
    For use only in rope maneuvers (for example, together with an ASCENSION handled rope clamp/grab).
  • Asymmetric Y shape for greater safety and ease of movement in rope maneuvers:
  • Choice of long or short lanyard according to the situation
  • 2 arms allow the user to remain connected to the safety system when passing intermediate anchor points.
  • Ends fitted with a STRING to help hold the connector in the correct position and to protect against abrasion.
  • Flat sewn webbing for greater resistance to cutting and sharp edges, as well as to abrasion and aging.
  • The SPELEGYCA is not an energy absorber.
  • Short arm: 32 cm
  • Long arm: 58 cm
  • Weight: 90 g
  • 22kN
  • CE EN 354

  • products\UH-PZLS010.jpg UH-PZLS010: Petzl, AVENTEX Symmetrical Y-Lanyard for Tyroleans and Roped Traverses [L36]
    $35.95 $34.25 On Sale!
    The Aventex is a double lanyard designed for adventure-park Tyroleans and rope traverses.
  • Made of robust webbing with two equal-length straps, the Aventex makes it easy to self belay while negotiating adventure-park courses.
  • The broad "V" in the straps facilitates the passing of anchor points.
  • The Aventex connects to a harness with a simple girth hitch and is equipped with a Petzl String carabiner retainer on the end of each strap.
  • The Aventex lanyard is not an energy absorber and should not be sued for via-ferrata.

    Technical specifications:
  • Length: 70 cm
  • 2 arms of 58 cm allow a 116 cm reach
  • Weight: 125 g
  • CE

  • products/UH-YTLS016.jpg UH-YTLS016: Yates, Webbing Lanyards, choices [830 Series]
    $34.00 $32.30 On Sale!
    Manufactured from heavy duty 1 inch 9800 lbf. webbing.
  • Available in fixed lengths.
  • Work positioning only.
  • Made with steel snap hooks.
  • Strength 5000 lbf.
  • ANSI approved
  • Choices: 2 ft., 3 ft., or
    4 ft. (Add'L $2 fee), 5ft. (Add'L $4 fee), or 6 ft. (Add'L $6 fee)

  • products/UH-YTLS020.jpg UH-YTLS020: Yates, Tower Bypass Lanyard, 34 in. [325]
    $129.00 $122.55 On Sale!
    Manufactured from heavy duty 1 inch webbing. 34 inches in length. Aluminum snap and aluminum ladder hooks.
    • Strength 5000 lbf.
    • ANSI approved

    UH-YTNS019: Yates, 100% Tie Off Adjustable Length Shock Absorbing Lanyard, 4',
    3/4 in Steel Snap Hooks [805]

    $111.00 $105.45 On Sale!
    Lanyard legs are made from heavy duty 1 inch, 9800 lbf. webbing. Steel snap hooks have .75 inch gate opening. D ring can be used for tie-back.
    • Strength 5000 lbf.
    • ANSI approved

    products/UH-PMLS009.jpg UH-PMLS009: PMI Fallstop Web Lanyard, choices [SG5110_ Series]
    $34.50
    The fallstop web lanyard is designed to be used as a connecting device in a personal fall arrest, work positioning, or travel restraint system. The lanyard connect the user's harness to an achorage point, anchorage connector, or rope grab/fall arrester. The fallstop web lanyard is made of 1" polyester webbing for improved handling. Steel connectors unless noted below.
  • Certified: ANSI Z359.1, OSHA, CSA approved

    CHOICES: 2 ft. with 3/4" aluminum double locking snap hook/both ends - Add'L $30 fee,
    3 ft with 3/4" galvanized steel double-locking snap hook at both ends, or 4 ft with steel - Add'L $1 fee or 6 ft. with steel - Add'L $2 fee

  • products/UH-PMLS014.jpg UH-PMLS014: PMI Personal Tether, Positioning Strap [SG51117 / SG51119]
    $16.00
    Personal connection/positioning strap for use in ascending systems, or wherever a quick connection is needed.
  • Static pull MBS: 5,625 lbf, (25kN)

    CHOICES: Lengths: Fixed 20" Weight: 1.7 oz. or
    Adjustable 6" to 22" Weight 4.8 oz - Add'L $12 fee

  • products/UH-PMLS032-1.JPG UH-PMLS032: PMI, General Duty NFPA Rigging Strap, choices [SG51029 Series]
    $34.00 $32.50 On Sale!
    Developed for rigging professionals who need to go light and quick, but who still want the security and convenience of pre-built sewn straps. Excellent for setting strong, secure anchors and in all sorts of tethering applications. Made of reinforced 1” nylon webbing with a forged D-ring on both ends.
  • Strength is tested in end-to-end configurations.
  • Made in USA.
  • Certified NFPA 1983, G
  • MBS: 36kN, 8100 lbf
  • Weight: 12 oz. (350g)

    Sizes: 100cm (3.28ft), 150cm (4.92ft)- Add'L $4 fee or 200 cm (6.56ft)- Add'L $6 fee

  • products/UH-YTLS045-1.jpg UH-YTLS045: Yates, SPIE Lanyard
    NEW ITEM JUST ADDED [364]

    $57.00 $54.15 On Sale!
    22 inch lanyard made of 7000 lbf. nylon webbing. Designed to girth hitch to dorsal D ring of YATES Stabo or YATES Extraction harness for SPIE extraction operations.
  • Kong Tactical 3 Stage aluminium carabiner included.

  • products/UH-YTLS046-1.jpg UH-YTLS046: Yates, QR Personal Retention Lanyard [563]
    $59.50
    Yates Personal Retention Lanyard is designed using the first all black quick release shackle made of stainless steel. Stainless steel quick release shackle is manufactured with a non reflective black oxide plating process. Built with Mil-Spec. 5625 Tubular webbing this lanyard tests over 3,400lbf (15kN). Made in USA.
  • Length fully extended 32" (with carabiner attached 36")
  • Length retracted 21"

    COLORS: Black or Sand

  • products/UH-MSNS004.jpg UH-MSNS004: MSA Sure-Stop Shock Absorbing Lanyards, 4' or 6 ' LS Snap Adjustable [SML2068106LS]
    $44.50 $42.25 On Sale!
    Used as the shock absorbing component of a personal fall protection system.
  • Meets ANSI Z359.1 and applicable OSHA and CSA regulations.

    Incorporate a shock absorbing device, available in 1" strap, rope and a 1/4" steel cable. Custom lengths available by request.

    Choices: 4 ft. or 6 ft. (Add'L $14 fee)

  • products/UH-MSNS005.jpg UH-MSNS005: MSA Restraint Lanyards with 1 3/4", Nylon Strap, Choices[SWL226870LS Series]
    $31.20 $29.65 On Sale!
    Used as the shock absorbing component of a personal fall protection system.
  • LS Snap Harness Connection
  • LS Snapp Anchorage Connection
  • Meets ANSI Z359.1 and applicable OSHA and CSA regulations.

    CHOICES: 4 ft. Fixed or 6 ft. fixed or Adustable

  • products\UH-PZLS005.jpg UH-PZLS005: Petzl, JANE MGO Lanyard w/MGO attached, choices [L53 __ Series]
    $85.95 $82.95 On Sale!
    Mainly intended for back-up systems on metal structures.
  • Large, auto locking connector; attaches easily to metallic structures: permanently attached to lanyard to help prevent loss, captive eye helps maintain correct orientation.
  • Sewn ends with plastic sleeve: protects against abrasion.
  • CE EN 354 & EN 362

    Lengths: 60 cm (24"), 100cm (39")-(Add'L $4 fee) or
    150 cm - Add'L $14 fee

  • products/UH-PMNS009.JPG UH-PMNS009: PMI Heightec- Tensor Single Lanyards [SG51233] New April 2008
    $149.00 $135.00 On Sale!
    The heightec Tensor Single Lanyard, features the new Suspension Trauma Shock Absorber. This innovative shock absorber features on integral, automatically deployed foot loop

    Key Features: Sewn Termination, 25kN scaffold hook end, Features NEW suspension trauma Lanyard
  • 1.75m w/Suspension Trauma Shock Absorber

  • products/UH-PMNS010.JPG UH-PMNS010: PMI Heightec- Tensor Twin Lanyards, 1.25 or 1.5m [SG51211 / SG51212]
    New April 2008

    $210.00 $194.99 On Sale!
    Energy asorbing fall arrest lanyard of the very highest specification. heightec-PMI laynards are premium products offering advaced safety features. This lanyard has impressice technical specifications: the back-up webbing and stitching exceed the tensile strength requirements, of Euorpean standard EN 355 by 50% and it has been dynamically tested with a load of 125 kg without damage.

    Key Features: Sewn terminations - 25 kN scaffold hook - Comes with screw line for secure harness attachment - without Suspension Trauma Shock Absorber

    CHOICES: 1.25m or 1.5m

    products/UH-PMNS010.JPG UH-PMNS011: PMI Heightec- Tensor Twin Lanyards with Suspension Trauma Shock Absorber, 1.25 or 1.5m [SG512134/ SG51235]
    New April 2008

    $218.00 $199.99 On Sale!
    Energy asorbing fall arrest lanyard of the very highest specification. heightec-PMI laynards are premium products offering advaced safety features. This lanyard has impressice technical specifications: the back-up webbing and stitching exceed the tensile strength requirements, of Euorpean standard EN 355 by 50% and it has been dynamically tested with a load of 125 kg without damage.

    Key Features: Sewn terminations - 25 kN scaffold hook - Comes with screw line for secure harness attachment - Available with or without Suspension Trauma Shock Absorber

    CHOICES: 1.25m or 1.5m

    products/UH-PZLS028.jpg UH-PZLS028: Petzl, SCORPIO EASHOOK Lanyard [L60 H]
    NEW APRIL 2008

    $119.95 $108.95 On Sale!
    Y-shaped lanyard with tear-apart energy absorber and EASHOOK carabiners
  • Very simple to use, absorbs the energy of a fall by the tearing apart of certain sewn threads.
  • Absorber is stored in a zippered pouch:
  • protected from abrasion,
  • condition can be easily inspected (practical for rental programs).
  • Retractable lanyard arms are practical to use: reduced bulk,
  • carabiners are easily reached.
  • Carabiners are simple and quick to clip for increased safety.
  • Third, shorter arm attached to absorber for clipping to the bars (for resting) or for progressing closer to the cable.
  • Webbing loop allows direct attachment to harness with a girth hitch.
  • Certification, CE-UIAA
  • Weight: 540 g

  • products/UH-PZLS029.jpg UH-PZLS029: Petzl, SCORPIO VERTIGO W.LOCK Lanyard [L60 WL]
    NEW APRIL 2008

    $99.95 $90.95 On Sale!
    Y-shaped lanyard with tear-apart energy absorber and VERTIGO carabiners
  • Very simple to use, absorbs the energy of a fall by the tearing apart of certain sewn threads.
  • Absorber is stored in a zippered pouch: protected from abrasion,
  • condition can be easily inspected (practical for rental programs).
  • Retractable lanyard arms are practical to use: reduced bulk,
  • carabiners are easily reached.
  • Carabiners are simple and quick to clip for increased safety.
  • Third, shorter arm attached to absorber for clipping to the bars (for resting) or for progressing closer to the cable.
  • Webbing loop allows direct attachment to harness with a girth hitch.
  • Certification, CE - UIAA
  • Weight: 565 g

  • products/UH-PZLS030.jpg UH-PZLS030: Petzl, ZYPER VERTIGO WIRELOCK Lanyard [L56 WL]
    NEW APRIL 2008

    $99.95 $90.95 On Sale!
    Y-shaped lanyard with friction energy absorber and VERTIGO carabiners
    Absorbs the energy of the fall by slippage of the rope through the device (friction energy absorption system).

    Special very high strength stitching for the join between the rope and the two strands of the Y-shaped lanyard: no bulky knot.
  • Carabiners are simple and quick to clip for increased safety.
  • Braking rope is neatly stored on the equipment loop of the harness.
  • Webbing loop allows direct linking to the harness using a lark's foot knot.
  • Certification, CE UIAA
  • Weight: 660g

  • Contact Urban HART Email Urban HART
    HOME SHIPPING & ORDERING INFORMATION GIFT CERTIFICATES